Shipping Weight of Dexter Trailer Axle T20BTR-EZ-7258

Question

Question:

how much does this axle weigh?

asked by: Brian Z

0

Expert Reply:

Dexter Trailer Axle # T20BTR-EZ-7258 has a shipping weight 22-lbs. Its actual rated weight-carrying capacity is 2200-lbs. It could be used with leaf springs such as # e84SR, a pair of which is rated for 2000-lbs.

expert reply by: Adam R

0

Answer 1

The Dexter #T3584F-EZ-8974 axle beam weighs 65 pounds. I have attached a review video.

view full answer...

Answer 2

Yes, you can replace your weld-on coupler with a bolt-on. You'll just need to drill the holes. Then, if you wanted to go back to a weld-on later that would be fine too. Just to confirm you can check with the trailer's manufacturer…

view full answer...

Answer 3

The A-frame couplers we carry, like #12660-97SP, are weld-on applications and cannot be bolted on to a trailer frame. Any welding should be done by a qualified welder in a shop that works on trailers. The coupler you have reference accepts a 2-5/16…

view full answer...

Answer 4

7/8 of an inch in decimal form is .875 of an inch. The closest Bearing Buddy we have to that would be the #BB1810 which measures 1.810 inches. You might remeasure with a digital or dial caliper like part #PTW80157.

view full answer...

Answer 5

The Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs item #8327820-EB weighs 154 lbs.

view full answer...

Answer 6

The Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel part #AM32238B has a bolt pattern of 5 on 4.5". Check out the link I've added to see how to measure the current hubs and see if they're a…

view full answer...

Answer 7

You currently have the Equa-Flex Cushioned Equalizers #LC279687 used with your Lippert axles. We do have the MORryde Rubber Equalizers #MR87ZR that you can use to replace your current equalizers. These have 3" of travel and are rated for axles…

view full answer...

Answer 8

You shouldn't loose any wheel clearance with the Dexter E-Z Flex Suspension Kit. First you will want to see which of the Equalizers you need. There is a 6,000lb Equalizers #K71-654-00 (5-5/8") and 8,000lb Equalizers #K71-655-00…

view full answer...

Answer 9

The equalizers included with the Dexter E-Z Flex Suspension Kit #K71-653-00 that you referenced measure between 7-1/4 inches and 8-1/4 inches with deflection, from the center of one eye hole to the center of the other. Your existing EQ 310…

view full answer...

Answer 10

As your axles measure 35" apart from center to center but the frame hanger spread (FHS) measured 58-3/4", you did go the correct way. The axle spacing is definitely important, but the FHS is more so. Just be aware that you axle spacing may…

view full answer...

Answer 11

I do have an upgrade option for your 6-1/16" long, 4" tall Equalizer #TREQ310, and since you don't want to lower the ride height with the E-Z Flex #K71-652-00, I recommend going with an option from MORryde, as the Equa-Flex are just too…

view full answer...

Answer 12

The Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 you referenced are simply replacements for the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers #K71-652-00. To…

view full answer...

Shipping Weight of Dexter Trailer Axle T20BTR-EZ-7258

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching