Front Mount Hitch with 32 Inches Between Mounting Holes

Question

Question:

Are there any front hitch receivers that have 32inch on center holes?

asked by: Scott H

0

Expert Reply:

Because all of our front mount hitches are custom fit to a specific year, make and model of vehicle, the mounting hole distance is not a spec that's listed or typically needed on them.

If you're not using the hitch for a specific vehicle but rather for special fabrication project, you may be able to use one of our universal RV hitches like # 5350 which is adjustable to fit frames 24 to 46 inches wide. The Multi-Fit Motorhome Trailer Hitch has the highest capacity (500lb TW and 5,000lb GTW) available for a universal RV hitch. Custom fit front mount hitches are typically rated at 500 lbs vertical load and 9,000 lbs line pull.

expert reply by: Carla M

0

Answer 1

To see installation details for both hitches, click the provided links. The Curt #C14011 installs using 18mm bolts that use existing nut plates in your Excursion's frame. No drilling is required to completed the installation. The hitch has a…

view full answer...

Answer 2

The distance between all of the bolt holes side to side on the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" #BWHDRH25230 is 34.376". The distance from the top of the brackets down to the top of the receiver tube is…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 10

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 11

We do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a…

view full answer...

Answer 12

Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.

view full answer...