Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
(943 reviews)
Price: $78.54
In Stock
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Retail:$120.95
Our Price: $78.54
You Save: 35%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (943)
- Q & A (0)
- Photos
CURT Custom Fit Vehicle Wiring - C59236
- Universal Fit
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your vehicle's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring. If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your vehicle operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2009 BMW 1 Series
- 1992 - 1994 Audi 100 Sedan and Wagon - excluding Turbo
- 2019 - 2020 Fiat 124 Spider
- 2019 - 2020 Fiat 124 Spider
- 1974 - 1974 Volvo 140 Series
- 1974 - 1975 Volvo 160 Series
- 1988 - 1993 Mercedes-Benz 190
- 2011 - 2012 Mazda 2
- 2011 - 2017 Chrysler 200
- 1997 - 1998 Nissan 200SX
- 1977 - 1985 Mercedes-Benz 230 Coupe and Sedan
- 1977 - 1985 Mercedes-Benz 240 Coupe and Sedan - D
- 1975 - 1992 Volvo 240 Series
- 1993 - 1993 Volvo 240 Series Sedan and Wagon
- 1995 - 1998 Nissan 240SX
- 1976 - 1982 Volvo 260 Series
- 1977 - 1985 Mercedes-Benz 280 Coupe and Sedan - C and CE
- 2023 - 2024 Mazda 3 Hatchback
- 2019 - 2020 Mazda 3 Sedan
- 2014 - 2017 Mazda 3 with LED Taillights
- 2014 - 2018 Mazda 3 without LED Taillights
- 1984 - 2017 BMW 3 Series
- 2005 - 2010 Chrysler 300C
- 1977 - 1985 Mercedes-Benz 300CD Coupe and Sedan
- 1977 - 1985 Mercedes-Benz 300D Coupe and Sedan
- 1999 - 2004 Chrysler 300M
- 1979 - 1985 Mercedes-Benz 300TD Sedan - 123 Chassis
- 1979 - 1985 Mercedes-Benz 300TD Wagon - 123 Chassis
- 1981 - 1986 Mercedes-Benz 300TDT Wagon - 123 Chassis
- 1979 - 1986 Mercedes-Benz 300TE Wagon - 123 Chassis See All Vehicle Fits
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (942 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Mark 05/10/2024
Kia
Installed easily. Kia should have a plug in option so that you don't have to run wiring all the way to the battery. But installed fine, well detailed by etrailer.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Gale 05/10/2024
I had this wiring harness professionally installed. Works as it should.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
by: Michael 03/25/2024
Works as it should. The video made it easy to install. Didn't come with quiet enough hardware to install but that wasn't a big deal though.
by: Doug05/08/2023
I installed this item on my 2023 Hyundai Palisade and it did not go very well. The blue wire connectors that came with it are terrible and should not be used. Taillight wires on vehicles with LED lights are extremely thin and the blue connectors do not pierce thru the insulation and into the wire. Over half of the lights didn’t work and I had to spend way too much time figuring out where the problem was and then making new connections. I cut and soldered the connections to get the lights working.
by: Allan04/10/2024
Ordered wrong part. They graciously handled the mess I created and sent out the right parts I needed right away.
by: Thomas 11/09/2023
Excellent customer service. Had a few questions regarding correct trailer hitch and wiring harness to get and was quickly able to chat with a friendly and knowledgeable eTrailer associate. After my order within hours they had my order packed up and to the carrier for shipping. Very satisfied.
25
942
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Recommendations For Transporting Large Rollator RJ4405R With 2014 Hyundai SonataI have a different idea all together, but I looked up the Rollator RJ4405R you mentioned ad found it measures in at 29-1/2" x 29-1/2" x 23-1/2" so a capable carrier would be the # FHG77ZR but there is not a way to use it with the Class I trailer hitches available for your 2014 Hyundai Sonata Hybrid. You would need to use a different vehicle with a 2" receiver and then this rack would work perfectly. To keep using your Sonata you would need to pick up a small trailer such as the Detail...
view full answer... - Installing Tail Light Converter to 2008 BMW X5Instructions do come with the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236, and I have linked them for you to check out. However, this is a universal hardwire fit so the instructions are not specific to your 2008 BMW X5. What you will do is use a circuit tester such as the very handy Cordless Circuit Tester # PTW2979 and find the circuits for the turn signals, brake lights and tail lights. You will need to have someone engage these functions while you...
view full answer...
- Can The Curt Trailer Hitch Receiver Be Installed Without Bumper Removal On 2024 Acura MDX A-Spec? Yes, the Curt Trailer Hitch Receiver # C22HR can be installed without removing your rear bumper on your 2024 Acura MDX A Spec. I have linked an installation video below so you can see what all is involved with the installation of this receiver. I recommend installing the Curt Powered Tail Light Converter # C59236 when you install the receiver. This will give you a 4-way flat connector which will control the tail lights on most small trailers you might tow. It will also allow for Auxiliary...
view full answer... - Does The Hidden Hitch by Draw-Tite Affect The Hands Free Liftgate Feature On a 2021 BMW X5? The Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT96GR will not prevent you from using the kick feature for your hands free liftgate on your 2021 BMW X5. The receiver sits in front of the kick sensor so it will not interfere with the sensor. Do note the center section of the receiver hangs lower than the lower fascia so you will want to be mindful of this when performing the kick to open the liftgate. I do recommend installing the 4-Way # C59236 when you install the receiver. This...
view full answer... - Trailer Wiring Harness For 2021 Volkswagen iD.4The correct trailer wiring harness for your 2021 Volkswagen iD.4 is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This is a splice-in kit, and will not overload your system in any way as its converter is connected to the battery so it doesn't draw from your taillights.
view full answer... - How to Safely Tow a 2019 Jayco 3,750 GVWR Trailer with a 2006 Toyota TrundraSince your Tundra is rated to tow your trailer the only thing I really recommend going with, if you already have a hitch like part # 13184 and wiring like part # C59236 or # 20137, is a weight distribution (WD) system. This will not only level your towing setup but it will also improve the handling of your trailer if you choose a system with integrated sway control. The best WD system for any towing setup will have a tongue weight (TW) range that the total tongue weight (TTW) of your towing...
view full answer... - Will The 75082 Trailer Hitch Receiver Fit a 2018 BMW X1?We carry trailer hitches for your 2018 BMW X1 but the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75082 fits 1986-2012 Ford Ranger Pickups and 1994-2010 Mazda B Series Pickup trucks. My recommendation for your BMW is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13303 because of the quality and ease of installation compared to other options. I've attached an installation video to assist. If you will be doing any towing this this trailer...
view full answer... - Trailer Wiring Harness for 2011 Kia SorentoThe correct Curt trailer taillight wiring harness will depend on if your Sorento is equipped with the factory tow package. If it doesn't have the tow package, use # C56328, unless it's the SX model, which would use the # C59236. If it does have the tow package, it would use # C56332. The Curt # C56131 you'd looked at is a fit for the Kia Forte, and wouldn't work on your Sorento. I've linked to some installation videos that you might find helpful.
view full answer... - Using Hitch Extension for Cargo Carrier on 2005 Subaru Outback With Class II ReceiverUsing an extender like the part # HES6 you referenced will reduce the tongue weight capacity (or downward force that can be safely applied to the hitch) by 50 percent. I would avoid using an extender if at all possible. I would recommend the Pro Series 20 x 48 Cargo Carrier, part # 63155. It will fit your 1-1/4 inch class II receiver, and offers a 300 lb weight capacity. The shank is long enough to offer 11 inches of clearance measured from the hitch pin hole to the closest portion of...
view full answer... - Curt Trailer Wiring Comparison for 2015 Honda FitThe difference between the two Curt harnesses you mentioned is that the part # C59236 has a newer converter box which has a higher amperage rating than the older kit part # C56190KIT. For that reason the part # C59236 would be the better option.
view full answer... - Recommended Trailer Hitch and Towing Components For 2015 VW Golf TDI SportwagenThe Hidden Hitch 60283 has been discontinued. This hitch is not a fit for your 2015 model as they are only a fit for 2009 to 2014 model years. For your 2015 VW TDI Golf Sportwagen, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24949. This hitch requires no drilling, but underbody panel and fascia must be temporarily removed for installation. I recommend this hitch over the Curt # C11422 because it doesn't require a stabilization strap...
view full answer... - Recommended Trailer Hitch Receiver For 2018 Toyota CH-RFor this vehicle, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24962 which installs at the same location as the Curt hitch # C11490 which is a fit for this vehicle. This hitch install requires the removal of the bumper/fascia to install the hitch prior to reinstalling the bumper/fascia. I have attached an install video for you. To carry an unsupported load like a bike rack or hitch cargo carrier Curt hitch requiring a stability strap...
view full answer... - Best Trailer Hitch For 2021 Mercedes-Benz Sprinter 2500 W/ 170 Wheelbase and Standard BumperFor your 2021 Mercedes-Benz Sprinter 2500 with the 170" Wheel Base and standard rear bumper I recommend going with the Curt Trailer Hitch # C13388 due to it being made in the USA, and giving you 1" more ground clearance than the other available trailer hitch, the Draw-Tite # 75549. Keep in mind this hitch will only fit if your van is the cargo version, and not a passenger van. If you will be towing a trailer with your Sprinter then you will also need a vehicle wiring harness # C59236...
view full answer... - Recommended Trailer Wiring Harness for 2010 BMW X6To add trailer wiring to your 2010 BMW X6 I recommend using the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236, which has a powered converter and comes with quick splice hardware to allow you to complete the installation. If you also need a ball mount, hitch ball and hitch pin I recommend using the etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs # EBMK4 since it gives you all of the parts you should need to tow some different trailers. The ball...
view full answer... - Trailer Hitch Receiver Fit for 2016 BMW 328i xDrive WagonI checked with the manufacturer for you, and verified we do have a fit for your 2016 BMW 328i xDrive Wagon, which is the following: - Curt Trailer Hitch Receiver # C11367 This is a bolt-on trailer hitch that won't require any drilling into your BMW's frame and will fit your 328i xDrive perfectly. Additionally, if you were going to do some light towing and also needed a trailer wiring harness, the correct part for your BMW is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer...
view full answer... - Parts Needed to Install 7 Way Trailer Connector on 2011 VW TiguanWe do have what you're looking for to be able to install a 7 way plug on your 2011 VW Tiguan, and the base of all wiring starts with the 4 way connector; I recommend using the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236, which will give you a 4 way trailer connector that you'll need to start. Once you've installed that, you'll want to choose between the # ETBC7 for wired brake controllers or the # ETBC7L, which is used for wireless brake controllers or...
view full answer... - Recommended Trailer Hitch Receiver for 2022 Acura MDXFor your 2022 Acura MDX I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT42MR. This is a custom fit Class IV hitch with a 2" receiver. It features a concealed cross tube to help maintain a factory look and a black powder coat finish. The # DT42MR has a max gross trailer weight of 6,000 lbs and tongue weight of 900 lbs. It is also compatible with weight distribution. If you plan on doing some towing, I recommend the Curt # C59236. The wiring harness will provide you with...
view full answer... - Trailer Wiring Options for 2003 BMW X5Both of the kits you mentioned are a fit for your 2003 BMW X5 with the difference being that the # C59236 is a universal kit that requires splicing into the vehicle wiring and the ZCI part # 119250KIT is a similar option that uses sensors instead of splicing for an easier and less invasive install.
view full answer... - Trailer Wiring Harness that Fits 2023 Kia Niro UTFor your 2023 Kia Niro UT we only have universal trailer wiring harnesses that are confirmed as a fit like the Curt # C59236 which requires splicing into the taillight circuits.
view full answer... - Parts Needed To Add 7-Way Connector To 1990 Izusu NPR TruckAbsolutely! To install a 7-way connector on your 1990 Isuzu NPR you will first need to install a 4-way connector. Since there is not a custom 4-way connector harness you will need to use the Upgraded Modulite Vehicle Wiring Harness Kit # C59236 which includes a circuit tester to verify the functions of your factory wiring to make sure you make the correct connections. The 4-way connector will wire as follows: White wire to the vehicles frame Red wire to brake light Green wire to passenger...
view full answer... - 4-Way Flat Trailer Connector Vehicle Wiring Harness for 1991 Jeep CherokeeFor your 1991 Jeep Cherokee I recommend using the Curt Powered Tail Light Converter # C59236. This system uses a powered converter so that I does not pull extra power from your Cherokee's taillight wiring. This will protect the wires from becoming damaged to due excessive power draw. Para su Jeep Cherokee 1991, recomiendo usar el convertidor de luz trasera con motor Curt # C59236. Este sistema utiliza un convertidor alimentado para que no extraiga energía adicional del cableado de las...
view full answer... - Hardwired 4-Pole Trailer Wiring Kit for 2019 Hyundai Santa Fe Ultimate Without Tow PackageIn the 2019 Hyundai Santa Fe Ultimate without the tow package you can use Curt universal hardwire 4-pole kit # C59236. I confirmed compatibility with my tech contact at Curt. At the present time (March 2019) this is the only hardwire option confirmed for the vehicle. Please refer to the linked review and installation videos for more details on operation and installation.
view full answer... - Solution for 4-Way Wiring on 2001 Mercury Grand MarquisAlthough they may be similar, the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11140504 only works with the 1998-2003 Ford Crown Victoria according to the manufacturer. In order to add a wiring harness to your 2001 Mercury Grand Marquis you will need to use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
view full answer... - What is the Best Hitch for a 2024 Mazda CX-90?The best hitch for a 2024 Mazda CX-90 is going to be the Curt item # C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like the Curt hitch item # C25FV because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance. I have attached a couple of pictures...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.