Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi
(32 reviews)
Price: $1,092.73
Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi
Item # T4813102
Retail:$1,420.04
Our Price: $1,092.73
You Save: $327.31
- All Info
- Reviews (32)
- Q & A (0)
- Photos
Dexter Brake Actuator - T4813102
- Electric-Hydraulic Brake Actuator
- Disc Brakes
- Dexter
Upgrade your trailer's actuator to meet the high demands of your disc brakes. Plug-and-play system combines the response time and effectiveness of electric brake controllers with the power of hydraulic actuators for faster stops.
Features:
- Activates your trailer's hydraulic disc brakes when you apply the brakes in your tow vehicle
- Brake controller (sold separately) is required to send signal from tow vehicle to actuator when brakes are applied
- 7-Way trailer connector (sold separately) is needed to transmit signal from brake controller
- Quick, easy connecting every time with plug-and-play design - no hardwiring required
- Integrated, weather-sealed connectors make installation a snap
- Additional plugs connect to vehicle battery and breakaway switch
- Delivers excellent response time
- Mounts upright so that motor pushes brake fluid down instead of sideways
- Reduces heat build-up and prevents fluid from spilling or leaking
- Vented - air gap between fluid resevoir and the pump and motor
- Resists weather with durable, plastic housing
- Kit comes with BrakeRite, wiring harness, breakaway switch, and breakaway battery harness included (battery sold separately)
- DOT compliant
Specs:
- Application: disc brakes
- Compatible with drum brakes when used with reducer (T4844100 - sold separately)
- Maximum output pressure: 1,500 psi
- Response time:
- Reaches 200 psi in 0.3 seconds
- Reaches 1,350 psi in 1.1 seconds
- Actuator's overall dimensions: 6" long x 7-1/4" wide x 9-1/8" tall
- Mounting hole dimensions:
- Set of 4 on bottom: 1/4"-20 UNC x 5/8" deep
- Set of 3 on back: 5/16"-18 UNC x 5/8" deep
- 2-Year warranty on BrakeRite unit
Notes:
- Dexter's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
- Ford and GM trucks with factory brake controller require adapter (DX35FR - sold separately).
K68-001-11 Dexter Axle BrakeRite 2 Plug-n-Play Electric-Over-Hydraulic Actuator
Replaces Titan 4835700, 4813102PP, and 4813100
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Defective
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi - T4813102
Average Customer Rating: 5.0 out of 5 stars (32 Customer Reviews)
Upgrade your trailer's actuator to meet the high demands of your disc brakes. Plug-and-play system combines the response time and effectiveness of electric brake controllers with the power of hydraulic actuators for faster stops.by: John02/28/2024
I pulled my boat for 1,500 miles soon after replacing the old pump. Brakes were effective and worked perfect. That was a year ago. Last week I launched my boat for the first time since then. No brakes. After a lot of contact cleaner, plugging and unplugging the cable to the truck, exercising the brake actuator, I finally got the pump to work again. That was the reason I replaced the original pump which was inop because of not being used. If you don't use it, you will lose it. It is a very expensive part. Dexter will not sell you the electronic pressure proportional valve that gets gummed up causing the pump to fail. Dexter will not give you the part number for that valve. Unfortunately, the stamped part number got obliterated part number during removal was unreadable. This was a very expensive lesson to learn, $1,069.98. In the future I will be exceptional careful when removing the valve should I have another failure. That valve will probably sell for less than $100.00.
As far as Etrailer is concerned, they are the best when it comes to shipping quickly and helping the customer get what he needs.
by: Jeremy 05/01/2024
I am most please that this company stands by their product and is a pleasure to deal with!!!!!!!!!!!!
by: Joe01/29/2023
They sent package with incorrect wiring but sent the new one. Easy install great customer service
by: Towguy05/26/2021
Expensive but worth every penny! Works like a charm, it does have a whining sound when in operation, this includes stop lights, you'll sit there with a constant buzzing, it's not super loud but noticeable. I have mine installed in a tongue tool box to protect from theft and weather so the sound is muffled. The extra safety and braking performance is worth though!
by: Bill G. 07/02/2017
The actuator kit has really worked well! Installation was straight forward, and the system has worked great on my boat trailer. Far better than the original surge brake system.
by: Alex06/11/2022
E trailer came through with limited quantities of eoh activator kits when no one else had them.
And a real person tracked my order and send me emails about status
by: Gary 11/16/2022
i used the same unit on my old trailer. installing this one on my new boat trailer, they work great
by: Jim N12/07/2015
Nice to have real brakes on the camper.
Titan has a great tech help line. I explained the problem i was facing and was given 2 things to verify. Less than 5 minutes of trouble shooting and I had it working just like it is supposed to. Not only did they help me solve my problem, but I was emailed a revised owners manual and field trouble shooting guide.
Great products and great CS from titan
by: Sandy 02/03/2022
Great kit and value. Wish including battery & box for simple but see why as some may want bigger battery
by: Clarence G.07/12/2017
Purchase this product a few years ago. Unfortunately, it accidentally got damaged in an accident. It worked so well that my customer asked to order the same for replacement.
by: Sandy W10/30/2022
great product. good value.
by: John05/20/2023
Second to none great service and fast delivery, can recommend to anybody who wants good service at the right price.
by: Travis 06/15/2023
Easy Plug an play
by: Larry 05/11/2023
Easy to order; delivery was quick.
by: Rod11/30/2020
Thanks for getting our alternative parts out to us. etrailer is one of my best vendors!!
by: Dwayne 08/09/2021
Nice quality
by: Mike 05/20/2024
by: Philip01/02/2024
by: Charles09/15/2022
by: Michael 08/23/2022
by: Douglas 03/02/2023
by: Todd 05/17/2024
by: Kristy 01/30/2024
by: Erin 11/28/2022
by: Jeremey03/24/2023
25
32
Show More Reviews
See what our Experts say about this Dexter Brake Actuator
- Why Do Trailer Brakes have to be Bled After 100 Miles Using the Titan Brakerite EHBAfter a certain amount of use after the initial installation you will want to bleed the brakes again to ensure that there is no air in the system and that everything is still working properly with the Titan BrakeRite # T4813102 and the brakes. After that you would just follow a regular maintenance schedule.
view full answer... - Should Trailer Brake Pads Fail After 3 YearsIt is possible that your brake pads could fail after 3 years depending how often you use the trailer, Basically different applications, loads, driving styles and other factors have an effect on how quickly brakes will need replaced. Adjust the brakes every 3,000 miles or when there is a question in the brake performance. For a saltwater marine environment stainless steel brake components, not aluminum, are the best possible option for durability and corrosion resistance. Although they...
view full answer... - Quality Product Comparison of Brakerite Versus Dexter Electric Over Hydraulic ActuatorsI sure can compare the quality difference of the Brakerite # T4813102 and the Dexter # K71-651 for you. The Dexter actuator is more durable because of its metal housing versus the plastic housing on the Brakerite actuator. The Brakerite has a 1 year warranty while the Dexter has a 2 year limited warranty. The Dexter doesn't have an adapter for OEM brake controllers, and will not be compatible with most OEM integrated brake controllers, but will be fine with the EOH aftermarket brake...
view full answer... - Best Electric Over Hydraulic Actuator Kit for Single Axle Trailer RecommendationThe best electric over hydraulic actuator kit we offer that includes brake lines is the HydraStar Electric Over Hydraulic Actuator Kit for Disc Brakes # HBA16-252-82 which is designed for trailers that are single or tandem axle. There would just be a few lines and fittings you wouldn't need to use. We have found that the Hydrastar actuators are by far the most reliable and best performing is why we recommend them so highly.
view full answer... - Breakaway Battery Recommendation for a Titan BrakeRite EHB Electric-Hydraulic Actuator # T4813102The breakaway battery used with the Titan BrakeRite EHB Electric-Hydraulic Actuator # T4813102 that you referenced must have at least 12 amp hours. The battery will be mounted on the trailer. For a kit that includes both breakaway batteries needed you would want the part # T4822100.
view full answer... - Replacement White Cover for Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator T4813102My contact at Titan advised that for your Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator # T4813102 you can use replacement cover # T4813000.
view full answer... - Troubleshooting Brake Rite Disc Brake Electric over Hydraulic Actuator On 2018 Ford F-450 The factory brake controller on your 2018 Ford F-450 is designed to work on electric over hydraulic brake systems. One note I did find in your owners manual is brake output is diminished by the truck at speeds of 11mph or lower so this will explain why when you press the brake pedal you do not get the same output as when using the manual activation. The simplest way to test the actuator is by simply pulling the breakaway cable and verifying it does activate and continuously run. You will...
view full answer... - Troubleshooting Titan BrakeRite Electric Over Hydraulic Brake System Not Building PressureIt sounds like that there is something causing a issue with the power coming in from your brake controller (blue wire). To start you will want to verify that you are getting constant 12 volt power using a Multimeter # PT89ZR, to your black wire and that there are no issues with the main power going into this wire. Titan recommends that this wire have at least 30amps of power. Since the breakaway switch has its own power source it doesn't rely on the black wire for its power. Next you...
view full answer... - Does Integrated Brake Controller of 2015 Chevy Silverado work w Titan Electric Over HydraulicYour 2015 Chevy Silverado integrated brake controller SHOULD work fine with this actuator as in 2015 Chevy started installing brake controllers in their trucks that are compatible with electric over hydraulic actuators. We have found that typically an aftermarket one like the P2 # 90885 will work best. But yours should work just fine.
view full answer... - Will Titan BrakeRite EHB Actuator, # T4813102 Work on 2011 Dodge Ram with Factory Brake ControllerI spoke with my contact at Titan about whether or not the BrakeRite EHB Electric-Hydraulic Actuator, # T4813102, is compatible with the factory installed brake controller on the 2011 Dodge Ram. He stated that for 2011, Dodge was supposed to have rectified a problem that prevented earlier model years with factory brake controllers from working with this system. He has not heard if the problem has been fixed or not and cannot state if the system will work directly with 2011 model. However,...
view full answer... - Converting Military Trailer Air Over Hydraulic Drum Brakes to Electric Over HydraulicYou are correct, there are 4 electric over hydraulic braking systems, from 3 manufacturers, that can be used to eliminate the air over hydraulic actuator on your M200A1 trailer. These systems all require a breakaway system to meet DOT safety standards. I will detail each system for you so you can select the one that will work best for your truck and trailer setup. First, the Dexter Electric Over Hydraulic Brake Actuator, # K71-650, would be a good choice because it will work with the OEM...
view full answer... - Recommended Electric Over Hydraulic Braking System For Venture Boat Trailer With Surge Brake SystemYes, you can remove your current Surge Brake Actuator and install a standard coupler like the Demco Channel Tongue Trailer Coupler # 12564 and install the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 to provide faster and safer braking for your Venture boat trailer. The Titan BrakeRite will require you to install a brake controller to operate. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195 as it was designed...
view full answer... - Titan Electric Over Hydraulic Brake Parts Recommendation for 5,200 lb AxleI have a solution for you, but all of the kits we offer are all designed for 3,500 lb axles. For the actuator you would want the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 that comes with the breakaway kit. For a tandem axle brake line kit you would then want the # DM5425, and then for a disk brake kit for 5,200 lb axles you would want the part # K2HR526DKG. The hubs have a 6 on 5-1/2 inch bolt pattern and would require the bearings part # 25580 and # 15123...
view full answer... - Comparing Dexter DX, BrakeRite II, and Hydrastar Electric-Over-Hydraulic ActuatorsThe Dexter DX Series # K71-651 and the Hydrastar Vented Marine # HS381-8067 are more comparable as they both have hardwire installations (just made by different manufacturers) while the Dexter BrakeRite II # T4813102 is more of a "plug-and-play" type installation. Out of these options I highly recommend the Hydrastar Vented Marine # HS381-8067 though because I've had far less troubleshooting questions about their system. As an extra perk, this Hydrastar model has a vented end plate that...
view full answer... - Should Dexter Axle BrakeRite EOH System Be Upgraded to Hydrastar EOH SystemThe Dexter BrakeRite II Electric Over Hydraulic Actuator Kit # T4813102 is a perfectly fine system so if it were me and I had a way to just replace something on it I would end up going that route. If you know what's wrong with your BrakeRite system just let me know and I can see what I can do to assist from my end of things! With that being said, if you aren't happy with the performance of your BrakeRite or you'd like to upgrade your EOH (electric-over-hydraulic) system in the near future...
view full answer... - Parts Needed to Install Disc Brake Kit on a 2014 Sabre 39 ft TrailerAs far as a disc brake electric over hydraulic actuator made by Titan the BrakeRite part # T4813102 is the only solution that Titan offers. This would work well for you. The disc brake kit part # K2HR712 that you referenced would work well with the bearings # 25580 and # 14125A that would be required to install. Since you have an integrated controller you would need the adapter part # T4845900 as well. You have everything then with the part # T4830000 for a brake line kit and part # T4821800...
view full answer... - Disc Brake Kit and Lines to Use with Titan Electric-Hydraulic ActuatorAll of the parts you mentioned are compatible with each other and would work great on a 5,200 lb trailer axle like what you have that has 5 bolt mounting flanges. The Hydrastar Actuator part # HBA16 is designed for disc brake kits like the # K2HR526DKG, which also works great with the brake line kit part # T4830000. Now that said the actuator part number you just mentioned is just the actuator so if you needed the complete kit with the wiring, mount hardware, and breakaway you'd want the...
view full answer... - How To Use Factory Brake Controller On 2011 Chevy Truck With Electric/Hydraulic Trailer BrakesIf you have the Titan BrakeRite Actuator on your 2011 Chevy, then you will be able to use the Titan BrakeRite Adapter for your Chevy integral brake controller. You will need to get the correct adapter to fit the BrakeRite actuator that is on your vehicle. The Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 will require the Titan BrakeRite SD Adapter # T4845900. If you do not have the Titan BrakeRite actuator, you will need to replace your factory brake controller...
view full answer... - Factory & Aftermarket Brake Control Not Fully Activating Trailer Brakes that Work w/Other TrucksSince you had problems with both the factory controller and an aftermarket controller AND the brakes work fine with a different truck that indicates a problem somewhere between the brake controller and the 7-Way connector. Make sure that your 2005 Ford F-250 trailer connector is clean and free of corrosion inside, where the wires attach, and outside on the pins. Inspect the wiring leading to the 7-Way as best as you are able and fix any damaged or pinched wires as needed. If you cannot...
view full answer... - Troubleshooting a Faulty Brake Actuator Coupler That Will Not Reattach to Hitch BallWhen you say the tongue will not fall down, it sounds like the shock in the actuator may need to be replaced. There may be a few other parts that could be rusted, bent or broken. Replacing parts in the brake actuator coupler is not an easy task and usually requires a mechanically inclined person. Another factor to consider is that by the time you purchase all of the replacement parts you are better off replacing the entire coupler and having all new parts. I would not recommend replacing...
view full answer... - Electric Over Hydraulic Disc Brake Setup Recommendation for a Tandem Axle TrailerIf you do have 6 on 5-1/2 inch bolt pattern wheels you would want to start with two sets of the Kodiak Disc Brake Kit # K2R526D. These will work on your 5 bolt mounting flange, have enough capacity as they are for 5,200 and 6,000 lb axles. I would strongly recommend you determine your bolt pattern before you buy anything though. Check out the FAQ article I attached on determining bolt patterns. For an actuator setup I would recommend the Titan BrakeRite I Plug and Play Electric-Hydraulic...
view full answer... - P3 Brake Controller Setting for Electric over Hydraulic BrakesYes, you will want to put your Prodigy P3 Brake Controller # 90195 into electric over hydraulic mode in order to tow your boat trailer with an electric over hydraulic actuator like the Titan BrakeRite EHB # T4813102. I attached a picture I took from the instructions for the P3 that show how to put it into EOH mode.
view full answer...
- Will the BrakeRite EHB Electric-Hydraulic Actuator # T4813102 Work Well on a 3 Axle TrailerI spoke with my contact at Titan and he spoke with one of the original developers of the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit, part # T4813102, and he said that you would have no problem using this # T4813102 on your trailer setup that has three 6K axles that weighs 6,000 lbs with your boat on it. I attached installation instructions for you to check out below also. You will also need a brake controller that is compatible with electric over hydraulic brakes...
view full answer... - Adapter to Use BrakeRite Titan Brake Actuator with Integrated Brake Controller of 2019 Ford F-150That's a bummer to hear that the integrated controller of your 2019 Ford F-150 won't work with your Titan BrakeRite but it's not totally shocking to us since the factory controller aren't super consistent with this style of trailer brake actuator. So your best solution is the adapter you mentioned Titan BrakeRite SD Adapter for Ford/Chevy Integral Brake Controllers # T4845900 and you'd be set.
view full answer...
Do you have a question about this Brake Actuator?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Manda E
Updated by:
Carrie F
Updated by:
Ryan F
Video Edited:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.