Dexter Hydraulic Brake Line with Fittings - 25" Long

See what our Experts say about this Dexter Accessories and Parts

• Single Hydraulic Brake Line w/ Male & Female Fittings For Right Hand 10 Inch Hydraulic Brake
  The Demco Hydraulic Brake Hose with Fittings - 18-7/8" Long # DM05982 has the incorrect fittings for the Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs # AKUBRK-35R. The hose that has the correct 3/8" fittings and male and female ends like the Demco is the Titan Hydraulic Brake Line with Fittings - 25" Long # T0980100 or 18-25/32" Long # T0776500. Also wanted to mention that the # AKUBRK-35R does need Mounting Hardware # BRKH10BS.
  view full answer...
• Flexible Brake Line Compatible With Demco Brake Line Kit For Using With Swing Away Trailer Tongue
  You will be able to pair the Demco Hydraulic Brake Line Kit # DM5424 with the 25" Line # T0980100. This will allow for you to use your swing away tongue operate. A Bracket # DM05981-95 will secure the end near your swing away to prevent the hard line from moving around and rubbing on the front of the trailer.
  view full answer...
• Will a Fold Away Coupler Work on a 2002 Blazer Bass Boat Trailer with Hydraulic Surge Brakes
  Yes, the Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, will work on a trailer with surge breaks. You will need to determine the length of the coupler that will be in front of the fold away to select the appropriate length of flexible hydraulic brake line to allow the foldaway to fold without damaging the brake line. We have several lengths of flexible brake line available for this. Titan Hydraulic Brake Line with Fittings - 12-27/32 inches Long,...
  view full answer...
• What are the Fittings Made Of on 25 Inch Titan Hydraulic Flexible Brake Line with Fittings
  You are correct. Flexible brake line # T0980100 can be used in any part of a hydraulic braking system including going from the caliper to the metal line like you want. The ends are different. The more brass-looking one is zinc-plated steel. The other end is steel. My contact at Titan believed it to be stainless steel but could not verify that with the technical data for the product. This same part and design has been around since the 1970s so it is a commonly used part in trailer braking...
  view full answer...
• Flexible Brake Line Needed for Titan Replacement Master Cylinder Assembly # T2374600
  If you are just looking to replace the brake line from the master cylinder to your steel brake lines, you can use Titan Hydraulic Brake Line with Fittings, # T0980100. If you would like to replace all of the lines from master cylinder to brakes, take a look at HydraStar Hydraulic Brake Line Kit, # HS496-252. I have included a snapshot to illustrate what is included in the kit. As you can see in the picture, you will have enough brake line to go 27-1/2 ft back from the master cylinder which...
  view full answer...
  
• Can a Titan Aero 7500 Drum Brake Actuator be Used with Disc Trailer Brakes
  Since brake actuator # T4839000 is a drum brake actuator you will have to replace the master cylinder with # T4714200042 which is the one for disc bake applications. Disc brakes require more psi to activate the brakes so you cannot use the drum master cylinder because it will not be strong enough. Nothing else about the actuator will have to be changed. You can use the same brake lines as well. But if the trailer currently has steel lines going to the drum brake wheel cylinders you will...
  view full answer...
• Tongue Size on Fulton Fold-Away Trailer Coupler Hinge Kit, Part # FHDPB350101
  The Fulton Fold-Away Coupler Hinge Kit, part # FHDPB350101, is intended for use on steel (but not aluminum) boat trailers that have a tongue size of 3 x 5 inches. Yes, this is the internal dimension of the two coupler halves. When installed the two halves of your trailer tongue will each slide into one half of the coupler. I contacted Shorelandr and confirmed that your steel trailer PT2440T has a 3 x 5 tongue (about 78 inches in length); this will mate properly with the Fulton coupler....
  view full answer...
  
• What Does The Clip On The Female End Of Brake Hose # T0980100 Do
  The clip on the end of the female end on The Titan Hydraulic Brake Line with Fittings # T0980100 is a retaining clip to help keep it secure to the male fitting. The flexible design of the hose makes it perfect for use with foldaway trailer tongues. I attached a review video link below.
  view full answer...
• Flexible Brake Line Recommendation for Use with Fulton Hinge Kit
  Yes, the part # T0980100 is a 25 inch long flexible brake line that will work well with the hinge part # FHDPB230101.
  view full answer...
• Replacement Brake Line for Redline 310797
  I have two different replacement options for your Redline 310797 brake line. The first is the Dexter Hydraulic Brake Line # T0980100 which measures 25" long. The second is the Dexter Hydraulic Brake Line # T0776500 which measures 18-25/32" long. Both have the same 3/8"-24 UNF male and female fittings.
  view full answer...
• Does Brake Line Have to be Cut When Adding Coupler Hinge Kit
  The flexible line part # T0980100 is designed to thread directly into the back of a surge brake actuator. Instead of cutting your current hard brake line you would want to coil the metal line to move the fitting back so that you can use the flex line there. There are some simple little pipe benders that you can get at a hardware store that will allow you to bend steel lines without kinking them. You can usually do it by hand by carefully bending the line around something like a soda...
  view full answer...
• Parts Needed to Convert Titan Model 6 Drum Brake Actuator # T4079200 to 4-Disc Brake Operation
  It is possible to rebuild a drum brake actuator to handle the higher pressure and fluid displacement required for disc brake assemblies. However, in the case of your four Kodiak disc brakes (part # K1HR35D) for use on a tandem axle trailer these will require more fluid displacement than can be provided even by a modified Model 6 actuator. A drum-to-disc-modified Model 6 actuator could handle the requirements of two brake assemblies but not four, according to my contact at Titan. He advised...
  view full answer...
• Brake Line Fittings for 70LB Brake Actuator
  We do not carry a 70LP Brake Actuator actuator and I could not find a reference to its fittings in my research, so you will need to know the type of fittings that connect to your actuator. The Titan Hydraulic Brake Line with Fittings # T0980100 uses standard 3/8"-24 UNF (Unified Thread Standard) male and female fittings; your 70LP would need to be compatible with that fitting so take a look at what you currently have to know for sure if this brake line will work for you.
  view full answer...
• Flexible Brake Line for a Trailer with a Folding Tongue Coupler
  The Titan brake line # T0980100 is 25 inches long and should work for you since you are adding the reverse electric lock out. You will want the flexible line to be long enough to not bind or put stress on the rest of the brake lines when the coupler is folded in. It will need to go from the back of the master cylinder, or in this case back of the lockout solenoid, past the hinge.
  view full answer...
• Selecting a Brake Line Kit for Boat Trailer Being Converted to Disc Brakes
  You are correct to place your disc brakes on the rear axle of your boat trailer since this is where most of the weight will be carried (nearer to the boat's motor). Disc brake and torsion axle applications both require flexible brake lines so yes you can use the kit you referenced, part # DM5424. This kit includes 18-7/8-inch long flexible lines, but if your measurement shows you need longer flex lines we offer various sizes of lines; part # T0777300 is 13-inches; part # T0776500 is 18-25/32-inches...
  view full answer...
• Brake Lines for Hydraulic Brakes on a Slide Axle Trailer
  What I would do is run regular steel brake line back to the mid point of where the axle can travel like you have said. Then from there use the flexible hose long enough to reach when the axle is in the most forward or most rearward position and long enough for the travel of the suspension. We do not have a kit with all flexible hose but a local auto parts store should have all of the parts needed to fabricate something up. The longest flexible hose we have is # T0980100 at 25 inches.
  view full answer...
• Availability of Flexible Brake Line for Rear of Trailer Surge Actuator and at Brake Assemblies
  We offer the Titan, part # T0980100 for a flexible brake line. This line is 25-inches long and has 3/8 inch fittings. This could be used at the rear of the master cylinder and at the brake lines.
  view full answer...
• Installation Instructions for the Fulton Fold-Away Coupler # FHDPB230101
  The Fulton Fold-Away Hinge Kit, item # FHDPB230101, is designed for bolt-on installation. If you need a weld on kit, you would use the Fulton Fold-Away Coupler Hinge Kit, Weld On, item # FHDPW230300, for your application. To install either of these foldaway kits you will need to cut the trailer tongue at the desired pivot point, up to 36 inches see table below, and then attach the two sides of the fold away to the cut ends of the trailer tongue. Be careful not to damage any wiring or...
  view full answer...
• 2005 Four Winns Replacement Actuator for Swing Away Boat Trailer
  The Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 would be a great choice for an actuator to replace the surge actuator on your swing away trailer. You may need a new flexible brake line replacement as well with the part # T0980100 as well.
  view full answer...
• Flexible Brake Lines For Trailer When Installing Folding Tongue
  You will need to check the fittings on your brake actuator to make sure you select a flexible line that will work for you. One flexible line we offer is the Titan, part # T0980100. This line is 25-inches long and has 3/8 inch fittings. All of the flexible brake lines we sell have fittings so you can check out the attached link I provided and use the filters to find the right length hose that has the correct fittings that will work.
  view full answer...
• How to Modify Brake Lines for Folding Tongue Boat Trailer
  You could the 25 inch long hydraulic brake line with fittings, part # T0980100. You would just need to connect the line to your actuator master cylinder to route brake fluid to your trailer brakes. The fittings are included. We offer the flexible line in a few different lengths as well. For example # T0777300 is 13 inches long.
  view full answer...
• Can Electric Locket Be Added To Dexter DX7.5L A-60 Brake Actuator
  Yes, you can add the # T4748800 to the Dexter DX7.5L A-60 Brake Actuator # DX83FR so you have an electric lockout. This is also compatible with the Dexter Hydraulic Brake Line # T0980100 which is perfect for your folding tongue.
  view full answer...
• Attaching the Titan Hydraulic Brake Line When Using Fulton Fold-Away Coupler
  When using the Titan Hydraulic Brake Line # T0980100, there are fittings included to attach to your current brake line. One end of the brake line has a female fitting. This female fitting will attach to the male fitting on your brake line. You would need to coil the existing steel brake line in trailer frame behind where the Fold-Away Coupler # FHDPB350101, installs. So basically the Titan Line is adding an extension to your current brake line so the trailer tongue can fold. The other...
  view full answer...
  
• Do You Carry A Flexible Brake Line Longer Than 18 Inches In 1/4 Inch Diameter?
  I recommend the Titan Hydraulic Brake Line with Fittings - 25" Long # T0980100 for a longer flexible hose. This is a 3/8 inch diameter versus a 1/4 inch, so if you were to use it with current 1/4 inch, you'd need an adapter. If you want the 90 degree fitting, you can go with the Kodiak Hydraulic Brake Hose - FIF and 90-Degree Male Fittings w/ Stainless Flares - 1.5' # BH-3MFS90FF-1-5 or the Hydraulic Flex Hose - 18" long # 18018-SF which are both only 18 inches. We don't have larger...
  view full answer...

Do you have a question about this Accessories and Part?