Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Anodized aluminum electric-hydraulic actuator with control adapter module (CAM) lets you use your Ford, Chevy, or GM factory brake controller to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and hardware.
Features:
Specs:
Note: Do not power wash the Hydrastar actuator or take it through a commercial car wash. High-pressure water may damage the seals on the actuator.
The Hydrastar electric-over-hydraulic trailer brake actuator applies pressure to your trailer's hydraulic brake system in response to the electrical signals sent from your factory brake controller. As a result, your trailer's hydraulic brakes will be activated every time you apply the brakes in your vehicle or press the manual override on your controller.
Pair the Hydrastar electric-over-hydraulic actuator with your trailer's disc brakes to get the best possible braking setup. With disc brakes, you already have more consistent braking at higher speeds and a shorter stopping distance than you'd get with drum brakes. In addition to more reliable braking, you also have less cost to maintain the brakes as there are fewer moving parts. Combine these benefits with an electric brake controller and you'll get greater control over your already superior brakes, providing you with the best braking performance.
Hydrastar Electric-Over-Hydraulic Actuator vs. Standard Surge Brake Actuators
With the Hydrastar electric-over-hydraulic actuator, you can get all the benefits of towing with an electric brake controller while using hydraulic brakes. Because this actuator will activate according to the settings you have chosen for your factory brake controller, you will have more control over when and how your trailer brakes engage. Depending on the features of your brake controller, you may be able to control both the rate and intensity with which your trailer's brakes activate. You can also use the manual override on your brake controller, which allows you to engage the trailer brakes without having to apply the brakes in your vehicle. And perhaps most impressive, if you have a proportional brake controller, your brakes will be activated with an intensity that matches the braking speed and power of your rig.
This pump-and-motor-based system increases response time compared with traditional actuators because the trailer brakes are triggered when you apply the brakes in the tow vehicle, as opposed to when the trailer pushes against the hitch ball. This not only gives you faster, more efficient braking, but it also eliminates the pushing sensation that occurs in setups that use standard surge brake actuators.
Hydrastar actuators are also beneficial because, unlike standard surge couplers, they allow you to activate your brakes when reversing down an incline, such as a boat ramp. Having the ability to brake in reverse gives you more control and prevents wear on your tow vehicle.
Durable, Marine-Grade Construction
The Hydrastar Marine actuator is ideal for use on boat trailers. Just like other Hydrastar electric-over-hydraulic actuator models, this system is built of extruded anodized aluminum for superior corrosion resistance. The weathertight seals protect internal components from the elements. The Hydrastar Marine actuator also features marine-grade gaskets and stainless steel hardware that won't rust. These extra features make it perfect for marine applications.
This actuator also has a vented end plate that releases pressure, moisture, and heat to help prevent any internal damage. Unlike models that are unable to release heat and pressure, this vented actuator can be safely mounted inside of a compartment on your trailer. As a result, this actuator is great for gooseneck and fifth-wheel trailers where finding space on the tongue can be nearly impossible.
Average Customer Rating: 4.8 out of 5 stars (13 Customer Reviews)
Anodized aluminum electric-hydraulic actuator with control adapter module (CAM) lets you use your Ford, Chevy, or GM factory brake controller to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and hardware.The cap to the brake fluid broke in shipping wondering if u can send a new one
Outstanding addition to my Reflection 5th wheel. Back from 7000 mile trip to Canada and no problems whatsoever. One panic stop and brakes were very effective. With over 80,000 on my trailer this is this first trip without some kind of brake issue: broken wire, needs adjustment, put together incorrectly at dealers, etc. I installed the unit myself. Relatively straight forward.
I did get confused on the wiring, could have been just me, but a separate wiring diagram for a 5th wheel might help. I didn't realize (and probably should have) that the emergency brake needs to get it's hot from the existing trailer battery and the main braking control has to get it's hot from the truck. All of this can be done in the pin box and is actually pretty straight forward.
Great product. Should have installed years ago.
I previously had vacuum over hydraulic brakes but was not able to find controller parts to install on my truck to operate brakes. hopefully this will do the trick.
Worth every single penny makes towing a boat Norma easy plug and play install
Products are high quality
Prices are reasonable
Costumer service is Excelent!
Cant get better than that!
Thank you etrailer!
E trailer came through with limited quantities of eoh activator kits when no one else had them.
And a real person tracked my order and send me emails about status
EXCELLENT service! Sales rep James is awesome. Ordered my part for an emergency repair and had it the next day! Definitely recommend for sales and service!
Fast as always
Great communication and service!
Do you have a question about this Brake Actuator?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
4/12/2024
Yes, of course we can send you out a replacement. I am sorry this happened, let me get you over to customer service.