Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This bolster bracket supports your pontoon boat trailer's bunks. Constructed of corrosion-resistant galvanized steel with a sturdy base, it helps you to properly align your 6" or 8" wide bunk boards on your trailer.
Features:
Specs:
This bracket holds two 2"x6" or 2"x8" bunk boards angled toward each other to provide support for one of the boat's pontoons. On both the right and left sides of the trailer, one bracket is mounted in the front and another in the rear. Carpeted bunk boards typically run from front to back.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
Average Customer Rating: 4.8 out of 5 stars (189 Customer Reviews)
This bolster bracket supports your pontoon boat trailer's bunks. Constructed of corrosion-resistant galvanized steel with a sturdy base, it helps you to properly align your 6" or 8" wide bunk boards on your trailer.Im converting my v-hull trailer to a pontoon boat trailer. These bunk brackets are essential to the project. They are well built and are sdjustable enough to ensure a perfect fit
Et railed had the parts I needed at a reasonable cost and shipped out in a timely manner, with follow up insuring delivery. Good company that does as they say!
Worked perfectly for my application. Had to widen an 8 foot wide trailer to accomodate a 8.5 wide boat.
Bolted 2x2 to top of existing frame and then bolted these bolsters to that. Bought 2x2 plastic end caps for the 2x2 and trailer looks like it Was made at the factory this way. Was cheaper than buying a new trailer.
Built my own trailer for my pontoon boat. These brackets are very sturdy and made it easy to fabricate bunks for the trailer.
Could not have built this pontoon trailer without these brackets. Just what the Dr ordered
The parts worked out perfectly for my pontoon
Thanks for supplying us with all our need, all parts i have ordered from etrailer.com are of top quality
I revamped a boat trailer into a pontoon trailer and these parts worked out great
Product is as stated, read past reviews and I am familiar with stamped brackets as far as having sharp edges, to protect yourself you should always wear gloves when handling steel.
Your product was perfect for what I needed to build my pontoon paddle boat trailer.
Great service and fast delivery. Good company to do business with
We have ordered this product before and it is an excellent product for our boat trailer application. The price is good and shipping and customer service is top knotch.
Charles
2/7/2021
We used this product to change out 2x4” runners to 2x6” for our pontoon trailer. This product works great for this application. I would say we are completely satisfied with this product
Worked great for my application!
This was my 1st purchase from etrailer and shopping with them has been great. I'm in the process of building a ramp to load and unload a 22' pontoon boat from water to shore to keep the toons looking good and for winter storage. I've made numerous phone calls with questions on different products to use and have received excellent help with professional guidance on this project.
So far I've gotten a winch, 6 sets of roller bunks and 12 galv. vee- brackets to support wooden bunks. All of this has arrived in a timely manner and the cost with free shipping is better then I could buy at any marine store. Some of these products aren't even stocked in this area. Will start construction on this soon and hope to post results when finished . Thanks to etrailer for their help.
GREAT "V" BRACKET ! No problem supporting a heavy 28' tour boat pontoon. The trailer the brackets are mounted on is used in salt water and after a year there is still no sign of rust. Excellent product !
Perfect fit for my 9 foot Colorado XT inflatable pontoon boat. Mounted these brackets onto the plywood base of a Ironton 4' x 8' trailer. Used roller bunks on the brackets because I needed to push a second Colorado XT onto the back of my truck with the electric motor and battery still attached to the boat.
I built my float on pontoon trailer using parts from e trailer.
Every part was top quality and these brackets were great.
Would recommend etrailer to anyone
Great product, much heavier then I thought they would be. That was a good thing.
Replaced old flat brackets for pontoon. It does make the boat sit a couple inches higher then what I replaced. I wen with 2x6 bunks and it worked out great.
I did have to drill out some of the holes for mounting due to sloppy finish work at mfg. But worth the trouble.
I would buy again.... but I hope I don't have to
I ordered these V brackets to convert an existing boat lift to accommodate a pontoon boat. Order arrived ahead of schedule and was exactly what I needed for a fair price. Can't ask for better than that!
William J.
10/3/2018
No problems whatsoever.
I ordered 12 of these to create a cradle for my pontoon lift at the lake. they are PERFECT. Thick gauge galvanized steel for awesome support, and the angle is perfect for my 27 foot tri-toon. The slot for mounting gave me the ability to dial in my cradle and properly support my beast. If I were to need more I would definitely buy them from etrailer again because they have the best price and the delivery was ahead of their estimated arrival time. My guess is that I won't need to because of the quality though.
THIS IS THE FIRST TIME I ORDERED THIS TYPE OF BUNK BRACKET CE26244G I USUALLY BUY THE 3/8 " STEEL ONES ( over 40 of them so far ) AND THOUGHT I WOULD TRY THESE ADJUSTABLE TYPE . THE SHIPPING & DELIVERY WAS FAST AND ON TIME , AND THEY APPEAR TO BE A VERY GOOD USEFUL PRODUCT , HOWEVER THEY ARRIVED WITH REALLY SHARP FINGER POKING BRIAR LIKE METAL POINTS STICKING OUT AT VARIOUS POINTS ON OF ALL 8 0F THEM ." OUCH " I POKED MY FINGERS TWICE , SO I PUT ON GLOVES AND DEBURED THEM WHICH I THINK SHOULD HAVE BEEN DONE BEFORE SHIPPING THEM TO CUSTOMERS . I HAVE PICTURES OF THE FINGER POKERS BUT DO NOT KNOW HOW TO SEND THEM VIA EMAIL .OTHER WISE I AM VERY SATISFIED WITH THEM . I AM NOT GOING TO SUE UNLESS MY FINGER GETS INFECTED AND FALLS OFF (only kidding ) ETRAILER IS ONE GREAT PLACE TO GET MY ORDERS PROMPTLY AND I WILL ORDER AGAIN , AS I LIKE YOUR PRODUCTS AND FAST DELIVERY THANK YOU ! -- [ JOE ]
Give you 5 stars if you eliminate the pokers HA ! HA! HA !--- THANKS AGAIN
I purchased these Ving bolted brackets to replace rusted broken metal brackets on my pontoon trailer. They are simple to install and hold the boat exactly like a new trailer. Helped to sell the boat. Love em. My next project is my boat lift.
Having to redo totally my Pontoon boat trailer. I needed some advice, called in and spoke with an Engineer to narrow my options. Very helpful.
I was able to order parts and get them within one (1) week. Good job guys
Package arrived on schedule. I am very pleased with the bolster brackets and clamps. Heavy duty steel and good galvanizing, will work perfectly with the kayak trailer that I am currently fabricating. Price and value was excellent. Will forward images of product and project when completed.
Quality product at great price. Galvanized and pre-drilled, with slot on bottom for adjustment. I plan on upgrading my recently purchased homemade pontoon boat trailer. Will greatly improve my loading procedure.
This product is being used to construct a 22' pontoon boat trailer..when the trailer is finished I will have used 10 of the cs26244g.. I have modified the bracket by adding a stiffener piece of metal and bolting it too the under side of bracket..just a little more support if I was to haul a bigger pontoon with a very large motor...Ken
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe
11/6/2023
I used the brackets to convert a v hull trailer to a pontoon trailer. After a year and many launches and retrievals, the brackets are still working and in great condition! Couldnt be happier!