Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus
(1361 reviews)
Price: $19.82
In Stock
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus
Item # 3040-P
Retail:$31.99
Our Price: $19.82
You Save: 38%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1361)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts - 3040-P
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Wiring length: 32"
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
304000 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces 3040-P
Installation Details
This Product Fits The Following Vehicles
- 2003 - 2013 Toyota 4Runner with factory Tow Package
- 2010 - 2020 Lexus GX 460 with factory Tow Package
- 2003 - 2009 Lexus GX 470 with factory Tow Package
- 2003 - 2021 Toyota Land Cruiser with factory Tow Package
- 2003 - 2007 Lexus LX 470 with factory Tow Package
- 2008 - 2021 Lexus LX 570 with factory Tow Package
- 2003 - 2023 Toyota Sequoia with factory Tow Package
- 2005 - 2015 Toyota Tacoma with factory Tow Package
- 2003 - 2014 Toyota Tundra with factory 4-Flat
- 2003 - 2014 Toyota Tundra with factory 7-Way
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus - 3040-P
Average Customer Rating: 4.9 out of 5 stars (1361 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Donnie04/18/2023
2014 Toyota Tundra
Arrived as promised it was easy to install I have tried it out a couple times on my 7X16 cargo trailer. Today I think I have set it up properly for my truck and trailer at B1 at #12 boost level. It never locked up trailer brakes but I believe it is right. Installed on 2014 4x4 Tundra with 4.6 V8 etrailer sent hook up wire to fit Toyota receptacle which was behind driver side kick panel. Grounded to gas pedal bolt, mounted unit under dash on right side of steering wheel.
by: Michael G04/18/2024
I use this brake controller for my 2007 Tundra hauling a 6x10 dump trailer. I’m very pleased with the product, it works great. The only thing I notice is that you have to be very aware of your load, dialing in the right number for your weight. I could be at 4.8 and my trailer tires will lock up. Go down to 4.6 and they’ll be good. That’s the only thing I notice.
by: gutley08/07/2016
Toyota Tundra
It would be easy to have this part order and install on the Tundra. i went one step further and end up using the wiring in the box with P3 Trailer brake and had to splice the wiring to make longer extension in order to install the P3 in the empty slot between the lighter and 12v socket which make is more customized look and out of way. Would be cool if they offer longer version for someone who want to install it somewhere else behind the driver's spot zone.
by: Henr L12/26/2016
2014 Toyota Tundra
Purchased brake controller for my 2014 Tuna. excellent order/shipping/receiving time.Received everything I needed with order in a very timely fashion. Website made it very easy to find and decide on exactly what I wanted. Etrailer will be my first choice for finding the accessories I need in the future. Purchased Tekonsha P3 brake controller and is the best thing to a factory installed controller I have encountered.
Henr L.
12/28/2017
WOW! Somebody that actually cares! This email was a real surprise. Yes I amstill using the controller and it works better than any I have ever owned. Idefinitely recommend I as well as etrailer.com to everyone interested.Thanks for caring about your customers!
by: Linus01/30/2014
Pictures of the install. Approximately a 20 min job. First picture my finger is pointing to the factory plug with the etrailer supplied harness plugged in. Note the harness did not specify that the white common with the ring terminal should be connected to ground. But then again that SHOULD be obvious. I will be towing this weekend so I will rate the product then. One minor gripe is that there is always power to the unit which is a battery drain (as evidenced with the key out of the ignition and the unit stayed on) Not sure as to the impact but the controller can always be unplugged or removed.
Sorry for the dirty floor mats in the photos.
Patrick B.
1/30/2014
Just a quick note, the controller has an automatic shut-off. After 15 minutes of the truck powering off and sitting still, the control powers down. As soon as it sees movement, it powers back on.
Trevor
6/29/2014
So you ran ground to negative side of battery? Or just on the frame interior somewhere?
Rachael H.
7/1/2014
For this harness you can either run the ground to the negative side of the battery, or use a know ground location within the vehicle. Running the ground to the negative side of the battery will yield a better connection, however you may have to extend the wire to reach the battery. Either way you choose to ground the controller it is always recommend to test the brake controller at slow speeds and make sure that it is functioning properly before starting a long trip.
by: John04/26/2024
2010 Toyota Tundra
I sell and install a variety of components for various companies and individuals. I have zero comebacks from this company. Not that I haven't received defective parts but they always make it right. And that is good business.
by: Mark N06/05/2014
Toyota Tacoma
Install is very easy once you locate the vehicle's brake controller plug. The plug in a Tacoma is extremely well hidden. It is high above the driver's side kick panel taped behind a plug wrapped in foam. I have attached a photo to help you locate it in a late model Tacoma. Once I found the plug, the install took less than 20 min. The controller works great.
Mark N.
6/5/2015
Very well
by: Robert 04/24/2024
Lexus
After a year of use in our Lexus GX460, it's been working flawlessly. Easy to install and use. Literally, plug and play.
by: Garen09/09/2013
2008 Toyota Tacoma
We ordered a part for the 2008 Land Cruiser and was told that it's the same installation. IT IS NOT! The connection to the harness is not in the same location as Tacoma. After looking for more than an hour, I got smart and found some info on another website. Even the manufacture has the info wrong. So, if you have a 200 series Land Cruiser, your plug is located under the dash behind the switches for the mirror. You will need to take apart the lower dash panel and then push out the switch panel. There is no need to detach any switch, it all hangs out just fine. See photos for the location of the plug. Plug the adapter in from there you can follow the instructions.
Patrick B.
9/10/2013
Thanks for the awesome review. Good info and really helpful for Land Cruiser folks.
by: Lonnie01/06/2023
Etrailer is great with their competent staff & instuctional videos.
by: Chris M08/20/2013
2013 Dodge Ram Pickup
Installed P3 this weekend in 2013 Tundra Crewmax with towing package and pre-wire. Extremely easy, even with the center console installation. Will let the photos tell the story. Did have to combine the P3 included harness with the additional OEM harness to gain the length I needed. Plug and play with the pre-wire. Hooked up to trailer and set boost levels for varying loads. Works great! Vast improvement over older model Tekonsha controller in my Ram 2500 Diesel. Pull a Kiefer BP horse trailer: about 3600 lbs empty, 7500 with 3 quarter horses and gear. Usually pull 6-8 times per year, with only 1-2 horses. Short distance and flat terrain. It took about an hour to install. Dad is a retired USAF/FAA radar technician with every tool known to man. He QC'd the job. Will try to write better review later.
by: Robert F.07/08/2015
Easy to install. Owners manual had location of factory plug and we installed the entire system in less than an hour. We used the removable bracket so the unit can be stored in the case that was included with the controller when not towing so it is completely out of the way of the drivers legs and knees. We are a collision repair shop and I would rate the ease of installation as relatively easy if you just use common sense and consider wiring location and controller location BEFORE drilling holes in the plastic lower dash cover. Also need to be mindful on the lower air bag that protects the drivers legs in a serious collision and the routing of the wires if you install it on the right side of the steering wheel. We used wire ties and a small plastic wire holder to place the wiring in a secure place that does not rub through the wire insulation or get snagged by the drivers feet. See the attached photos. All work was performed in slightly less than one hour.
by: Tyler05/16/2020
2014 Toyota Tundra
I picked up the redarc brake controller and sumo bags. I installed both today. I have to say I'm excited to use both when I pick up my travel trailer. The Redarc is so clean! It might have taken me an hour to install but that was just bc I was deciding how I wanted to run it .
Sumo bags took an hour to out on! I cant tell you how great they work yet. But the install was a breeze.
by: Randy09/12/2022
2008 Toyota Tundra
This makes trailer brake installation easy. It fits perfectly
by: David08/24/2020
Arrived sooner than I expected. Watched one helpful installation video (not exactly the same vehicle nor same brake controller but still useful). Took me about an hour and half (with heat breaks) to figure it all out and install. Works great. My only regret is that I waited so long to get to it. Saved over $250 compared to RV repair shop installation.
by: David 04/02/2023
Plug n play works great. Easy install.
David
4/3/2024
Great no issues.easy install
by: John p06/03/2016
Plug and play option is ALWAYS better than self-wiring. No problems once I went to Timbuktu in the dash to find the towing package connector.
John P.
6/3/2017
Still working great. Bought adapter to plug into my new truck.
by: Judy 10/31/2023
Easy to install with the controller I got along with the harness.
by: Mule skinner02/17/2022
2008 Toyota Tundra
Excellent 1st experience. Definitely a place to be a repeat customer and we wouldn’t hesitate to recommend etrailer to friends and family. Thank you etrailer!!
Mule S.
2/18/2023
Still working perfectly, after one year of service. We have never had any difficulties or problems, of any kind. 100 happy.
by: Robert07/13/2023
Toyota 4Runner
Excellent performance and value. The plastic mounting bracket tends to jam & I have low confidence it will survive many removals, but otherwise it is a nice little controller. Keeps a 2200lb trailer (empty) safely behind a 4000lb 4Runner. Installation using Tenkosha's Toyota wiring adapter took minutes.
by: Amanda06/12/2013
My package from you guys arrived Friday night, and I installed my brake controller on Saturday using both the 3040-P harness and the harness that comes with the unit. I connected the 3040-P pigtail to the factory connector and run it as far toward the passenger side as it would reach then cut the end off that plugs into the P3 as I needed more length. At this point I went to the storage area that I mounted the P3 in and drilled a hole just big enough for the 4 wires that come out of the P3 harness. At this end I used the P3 harness that came with the controller...fished it thru the little hole and connected about where the little pocket is on the right hand side of the steering wheel. I have yet to pull my trailer with it connected....hopefully this weekend, but at least it looks good!
by: James10/10/2023
The adapter and brake controller installed easy and had worked well.
by: Dennis 08/14/2021
Lexus
The Tehonsha Plug-In wiring adapter #3040-P fit just like it is supposed to in the 2015 Lexus KX 570. Also etrailer staff was very active in keeping me updated on my order progress and arrival. Also when I had trouble finding the KX side of the adapter the etrailer helped by providing articles and pictures. I am very pleased with my encounter with etrailer.
Dennis
8/29/2022
The wiring adapter continues to work fine.
by: Travis 10/13/2023
Works well, plug & play but needs to be a couple of inches longer to route correctly if mounted on the left side of the kneeboard.
by: Scott04/09/2022
2010 Toyota Sequoia Limited plugged into factory harness. Worked great
25
1361
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Recommended Brake Controller and 4-Way/7-Way Connector for 2018 Toyota 4Runner w/Tow PackageThe brake controller that I recommend for your 2018 Toyota 4Runner with the Tow Package is the Redarc Tow-Pro Elite # RED44FR because of how easy it is to use, the versatility in mounting locations, and the wide variety of towing applications it can accommodate. To connect this to your 4Runner you just need the adapters # 3040-P and # 331-TPH-017. The control box for the Tow-Pro Elite is able to sense the motion of the vehicle in any orientation and then the extra slack in the wiring harness...
view full answer...
- Brake Controller and Install Components Needed for P3 in 2009 Toyota Highlander with 7-WayYou can install the Prodigy P3 part # 90195 in your 2009 Toyota Highlander but you wouldn't be able to use the # 3040-P since your vehicle is not equipped with the needed port for that. For a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your vehicle...
view full answer... - Which Plug and Play Brake Controller Adapter for 2020 Toyota Sequoia TRD ProYou don't NEED a plug and play adapter to install the Tekonsha Prodigy P3 # 90195 in your 2020 Toyota SequoiaTRD Pro but it certainly makes it easier and eliminates the need to cut off or splice into factory wires. You'll want to use the # 3040-P to plug into the factory brake controller plug in under the dash and install the P3 without any splicing necessary. I've linked a video of the installation in a similar Sequoia; the year isn't the same but the process will be the same so you...
view full answer... - No Power on Red Brake Controller Wire when Brake Pedal Pressed on a 2013 Toyota TundraThe wiring harness you should be using on your 2013 Toyota Tundra is # 3040-P. While it is unlikely it is wired incorrectly it is possible. You can use your test light to test the connector on the vehicle (where 3040-P plugs into) and see if it has power when you step on the brake pedal. If it does then check to see if the red wire is connected in the corresponding location in the harness. If not you can move it. If there is no power then there is something amiss on the vehicle side that...
view full answer... - Brake Controller Install Harness for 2019 Toyota Tacoma to Install Prodigy ControllerThe correct brake controller install harness you need is the part # 3031-P for a Tekonsha controller like the very popular P3 # 90195. The harness you would have had in a 2015 Tacoma would have been the 3040-P which is different.
view full answer... - Recommended Towing Mirrors and Brake Controller for a 2004 Toyota Tundra with Factory Tow PackageThe towing mirrors that I recommend for your 2004 Toyota Tundra are the Longview # CTM4000 which come in a pair and are custom fit so they slip on over your OEM mirrors for a nice, clean look. Then for a brake controller I recommend the Tekonsha Primus IQ # TK90160 with the Plug-In Adapter # 3040-P. The Primus IQ is a great proportional brake controller that is cost-effective yet doesn't lack quality. It is very reliable which you can see from the customer reviews and easy to use as you...
view full answer... - Does Original Prodigy Brake Controller Install in 2007 Toyota Tundra with Harness # 3040-PThe Prodigy 90185 is the original prodigy and it was repalced by the P2, part # 90885, and then the P3, part # 90195. We have a video from when we installed the P3 in a 2007 Toyota Tundra using the # 3040-P harness that I've linked for you. The # 3040-P harness fits most Tekonsha controllers including the original Prodigy 90185.
view full answer... - Recommended Brake Controller Adapter For Tekonsha Voyager On 2003 Toyota 4RunnerThe harness you need for your Tekonsha Voyager brake controller to plug into the port under the dash to the left of the steering column of your 2003 4Runner is part # 3040-P. One end plugs into the back of brake controller and the other end simply plugs in to the vehicle port. Then attach the white ground to a clean metal surface and you are good to go.
view full answer... - Parts Needed To Install Redarc Tow-Pro Brake Controller on a 2015 Toyota TacomaIn order to install the Redarc Tow-Pro Liberty Brake Controller part # RED24FR or Tow Pro Elite part # RED44FR on a 2015 Toyota Tacoma you'll need the Tekonsha Plug-In Wiring Adapter part # 3040-P, the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness part # 331-TPH-017, and the Mounting Panel for Redarc Trailer Brake Controller Control Knob part # 331-TPSI-002. This is a completely plug-in-play option without splicing.
view full answer... - Where Is the Brake Controller Plug Located on a 2008 Lexus LX570?For your 2008 Lexus LX570 the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus # 3040-P will plug into the factory harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. This is only if you have the factory 7-way. I've attached a video of this installation (one of a Curt connector) on a couple of Toyota's which have the same connection location. If you don't already have the factory...
view full answer...
- Where to Find Brake Controller Install Harness on 2012 Toyota TacomaTo install the Tekonsha Primus IQ part # TK90160 in your 2012 Toyota Tacoma requires the install harness part # 3040-P. The harness you are looking for is by the emergency brake pedal. You may have to dig for it a little bit. But if you check out the install video I attached you'll see where our installer found it.
view full answer...
- Recommended Electric Brake Controller And Weight Distribution For 2014 Toyota TundraBecause you have the factory tow package in your 2014 Toyota Tundra, if you don't have a factory brake controller, you will need one. For a brake controller, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional, # 90195. This will give you braking at your trailer with the same timing and the same intesity in which you brake in your truck. This controller is an easy to read LCD display that takes the code deciphering of most brake controllers out...
view full answer... - Parts Needed to Install a Brake Controller in a 2012 Toyota TundraIf there is a round 7-way trailer connector at the rear of your 2012 Toyota Tundra all you would need to install the Prodigy P3 Brake Controller part # 90195 would be the correct harness part # 3040-P. If not, then you would need to hardwire the controller. You will need to start with a 4-way (if you do not have one). For that you would want the # HM11141835. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want...
view full answer... - Brake Controller and Install Harness Recommendation for a 2011 Toyota TundraFor a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. To install this controller all you would need is the install harness part # 3040-P. I attached an install video for you to check out as well.
view full answer... - Easy Brake Controller Recommendation for 2017 Lexus GX 460The P2 part # 90885 is a great solution for a proportional controller for your 2017 Lexus GX460 and the correct install harness is then the part # 3040-P. Another even easier option is the Curt Echo Mobile part # C51180 which basically just plugs into an active 7-way and once synced to a smart phone is ready to tow. This saves you install time and from having to mount anything in your vehicle interior. It's really great for the occasional tower like you. Check out the review video I attached...
view full answer... - Installing Brake Controller Using Factory Harness on 2007 Toyota TundraThe green wire you describe is for an illumination circuit and is not needed. You can confirm this if you wish by using a circuit tester like part # PTW2993 on the green wire. This wire should only show voltage when the vehicle headlights are switched on. Since your Tundra features the factory tow package wiring, the circuit providing power for the brake controller is already protected. No additional fuse is needed. I have provided a link to our Brake Controller FAQ that features additional...
view full answer... - Recommended Brake Controller and Wiring Harness for 2012 Toyota Tundra ConsoleThe Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus # 3040-P is a great option for Tekonsha brake controller wiring in the traditional location. However, because you desire the controller to be a part of your console, you'll just need to use some # 12-1-1 to extend the black, blue and white wires however long you need, and # DW07550-1 to extend the red wire. This wire is sold by the foot so make sure you adjust the quantity to however many feet you need...
view full answer...
- Brake Controller Install Harness Recommendation for 2011 Toyota SequoiaYes, the brake controller install harness you need is the part # 3040-P which is a confirmed fit for your 2011 Toyota Sequoia and fits the Tekonsha Voyager part # 39510 that you have as well.
view full answer... - Adding a 7-Way Trailer Connector to a 2013 Toyota Tundra with 4-Way ConnectorThe brake controller I recommend for your 2013 Toyota Tundra is the Prodigy P3, part # 90195. It's our top selling brake controller because of how easy it is to use and how reliable it is. Since you have a factory 4-way trailer connector on your truck you might have a port under the dash to plug in a brake controller. Look up behind the emergency brake pedal near the kick panel for a white connector. It's pointed out in the picture I attached and you can see it in the video I've linked...
view full answer... - What Parts are Needed to Install a Tekonsha Prodigy on a 2010 Toyota Tundra with Tow PackageAs long as the truck also has a 7-Way at the rear, you should not need any additional wiring components. You will need a truck specific conector to attach the brake controller. I have not seen a package with two connectors that have loose wires. The connector for a 2010 Tundra is part # 3040-P. This connector plugs into the Prodigy with the black connector and into the truck with the white connector. You will also need to attach the loose white wire to a good grounding point. The wire...
view full answer... - How to Identify the Correct Brake Switch Wire for a Brake Controller on a 2004 Toyota HighlanderUnfortunately, Toyota does not use the same color wire for the brake light switch on their vehicles. The best way to determine which wire is the correct wire is to use a circuit tester like part # PTW2993 and test for the wire that only gets hot when the brake pedal is pressed. I have attached a video of our technician testing for the correct brake switch wire for you to reference. Begin at the 6 minute and 25 second mark. The vehicle in the video is different than yours, but this should...
view full answer... - What is the Correct Brake Controller Wiring Harness for a 2013 Toyota TundraYes, if you are using a Tekonsha brake controller then you will use wiring harness # 3040-P. I have included a link showing a typical installation for you. The extra ground wire must be attached to a bare metal surface to complete installation because the factory Toyota ground is not sufficient for the brake controllers needs. This is a plug and play type of harness. One end plugs into the controller, the other end into the factory connector. No splicing required for installation.
view full answer... - Compatibility of Tuson DirecLink Brake Controller # 335DL-100 with 2006 Toyota TacomaI spoke with my contact at Tuson regarding the DirecLink Base Model Trailer Brake Controller # 335DL-100 and your 2006 Toyota Tacoma. The potential issue with regards to fitment for this controller on trucks prior to 2008 is that not all of them are equipped with the factory 16-pin OBD-II port under the dash that this hooks up to. Many previous model year trucks do have this port but many do not, making it difficult to confirm fitment accross the board which is why Tuson lists compatibility...
view full answer... - Parts Needed to Install Trailer Brake Controller on 2006 Lexus LX 470If your 2006 Lexus LX 470 is equipped with the factory 7-Way connector at the rear of the vehicle, all of the necessary wires are already run to the connector for it to be fully functional and allow for an easy installation of a trailer brake controller. All of the necessary fuses should also be present. For the brake controller, I highly recommend the Tekonsha Prodigy P3 # 90195. This is an excellent, proportional controller that will activate the trailer brakes at the same time and...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
DeAnne T
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Gregory U.
8/9/2017
Product been working great. I even kept the console part and move it newer Tundra truck that I brought and bigger camper. Work better than I expected. I did use the bracket that come with the controller and mounted it. So I wouldnt have to worry about it coming loose or being in so far in the console. It also allow me to use the manual brake easily.