Wheel Covers Hubcaps Specs:
Features:
Replaces 1 mirror-polished stainless steel wheel cover on the front of your Ford truck. Fits a 19-1/2", 8-lug wheel with 10 hand holes. Hardware included.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
Replaces 1 mirror-polished stainless steel wheel cover on the front of your Ford truck. Fits a 19-1/2", 8-lug wheel with 10 hand holes. Hardware included.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
Replaces 1 mirror-polished stainless steel wheel cover on the rear of your Ford truck. Fits a 19-1/2", 8-lug wheel with 10 hand holes. Hardware included.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
Replaces 1 mirror-polished stainless steel wheel cover on the rear of your Ford truck. Fits a 19-1/2", 8-lug wheel with 10 hand holes. Hardware included.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
Stylish, durable stainless steel wheel covers with a mirror polish will dress up your Ford that has 19-1/2", 8-lug wheels with 8 hand holes. Includes 4 hubcaps, hardware and a dual-tire inflation kit.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
Stylish, durable stainless steel wheel covers with a mirror polish will dress up your Ford that has 19-1/2", 8-lug wheels with 8 hand holes. Includes 4 hubcaps, hardware and a dual-tire inflation kit.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
These stylish wheel covers fit your vehicle that has 19-1/2", 8-lug wheels with 8 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
These stylish wheel covers fit your vehicle that has 19-1/2", 8-lug wheels with 8 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Videos
for Wheel Well Liner
Help Articles
for Wheel Well Liner
Expert Answers
for Wheel Well Liner
So first I want to verify how you measured the leaf springs. On the etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles #e88SR the 26" measurement is from center of leaf spring hole to center of leaf spring hole when the…
view full answer...Using the SumoSprings Maxim Custom Helper Springs #SSR-180-54-1 will greatly reduce the amount your 2020 Winnebago Adventurer 36Z leans to the passenger side. You will want to install these on both sides otherwise you will have very different…
view full answer...Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not see…
view full answer...The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part #SSR-180-54-1 for the rear and part #SSF-170-40-2 for the front.
view full answer...On your 1999 Ford F-350 dually it sounds like you are looking for the best option for a smoother ride and that you already have the Firestone Ride-Rite Air Helper Springs #F2550. If so, do you have the Firestone Ride-Rite LS Rear Shock Absorbers…
view full answer...For replacing the Drive Head #LC34FR and Idler Head #LC87FR on a Solera Slide Topper you will want to completely remove the slide topper from your RV/Camper. You will need to insert a pin into the end of the tube end cap(see image) to keep the…
view full answer...Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…
view full answer...The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…
view full answer...In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…
view full answer...From what I have found, the replacement for the AL-KO 7230 hub and drum assembly is the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased #AKHD-545-35-K. For brakes, I recommend the Electric Trailer Brake…
view full answer...You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
view full answer...The bolt holes on the top bracket of the CIPA Universal Door-Mount Replacement Mirrors #CM45000-2 are 3-13/16" apart center to center. I have attached a few diagrams showing the measurements for your reference.
view full answer...Filter Products (16)
Contact and Help
What our customers are saying:
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Eric
Cedar Springs, MI