SumoSprings Kit for Front and Rear of 2014 Itasca Sunstar 35F

Question

Question:

can you please tell me the part/product number for Sumosprings, front and rear for a 2014 Itasca Sunstar 35F?

asked by: Tim C

0

Expert Reply:

The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part # SSR-180-54-1 for the rear and part # SSF-170-40-2 for the front.

expert reply by: Jameson C

0

Answer 1

Using the SumoSprings Maxim Custom Helper Springs #SSR-180-54-1 will greatly reduce the amount your 2020 Winnebago Adventurer 36Z leans to the passenger side. You will want to install these on both sides otherwise you will have very different…

view full answer...

Answer 2

Hey Dave, Air Springs and SumoSprings both fall under the same category with the main goal to help prevent sag but offer different styles of solutions. Air springs offer the adjustability to help level your ride back out, which can make a huge…

view full answer...

Answer 3

The Progressive Dynamics Converter #PD4655V is specifically designed to replace the WFCO 8955 you have on your 2014 Thor Hurricane 27K motorhome. This is compatible with your two 6volt batteries as they are going to be wired in series to create 12V…

view full answer...

Answer 4

To flat tow your 2021 Jeep Wrangler Unlimited 4Xe Rubicon Hybrid you will need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you listed below: Tow Bar: Roadmaster Nighthawk All…

view full answer...

Answer 5

For your 2023 Coachmen Pursuit 31BH you will need the Front SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 and Rear SumoSprings Maxim Custom Helper Springs #SSR-184-40-1. If you were to select only one to install first I recommend the rear…

view full answer...

Answer 6

I would be happy to gather a list of parts to help you flat tow your 2023 Jeep Wrangler 4xe. I have listed the ones you will need below and included any installation videos we may have: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item…

view full answer...

Answer 7

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 8

The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part #SSR-180-54-1 for the rear and part #SSF-170-40-2 for the front.

view full answer...

Answer 9

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 - 1-1/2"…

view full answer...