What is the Top Bracket Bolt Spacing on CIPA Universal Door-Mount Replacement Mirrors

Question

Question:

What is bolt pattern on top bracket of these universal towing mirrors

asked by: Frank G

0

Expert Reply:

The bolt holes on the top bracket of the CIPA Universal Door-Mount Replacement Mirrors # CM45000-2 are 3-13/16" apart center to center. I have attached a few diagrams showing the measurements for your reference.

expert reply by: Robin H

0

CIPA Arm Measurements.
(click to enlarge)

CIPA Top Bracket Bolt Hole Spacing.
(click to enlarge)

Answer 1

The top mounting hole measured center to center to the bottom mounting hole is 18". The overall length of the arm is 19 1/4". The mirrors are going to be a bolt on installation, it may require drilling if existing holes are not present. All…

view full answer...

Answer 2

Since there are no custom fit tow mirrors for your 1982 Ford E250 Fiesta Camper Van I recommend the CIPA Universal Door-Mount Replacement Mirrors #CM45000-2 which will bolt to each door for added stability and extends your vision by 16" over the…

view full answer...

Answer 3

I pulled the CIPA Deluxe Door Mount Mirror, #11650, as well the CIPA Round, Convex HotSpot Mirror, #CM48500, from our warehouse in order to perform a quick test fit for you. In my test fit I placed the bracket for the hotspot mirror on top of the…

view full answer...

Answer 4

I recommend checking out the CIPA Universal Door-Mount Replacement Mirrors #CM45000-2 for your 1995 Ford L-Series truck. These bolt onto the door and give you a mirror that is 7-1/2" wide x 10-1/2" tall. These are a perfect solution for…

view full answer...

Answer 5

The distance between the lower arms on the K Source Universal Low-Mount Style Door Mirror #KS29MD runs 8-10" for installation. K Source was unable to give me the length and width of the mounting plate but the distance between the mounting holes…

view full answer...

Answer 6

My contact at Optronics confirmed that the output candle power of Optronics Flush-Mount Clear LED Trailer Backup Light #BUL35CB is 1120 per lamp. This trailer light uses a tiny amount of power since it features high-efficiency LEDs instead of…

view full answer...

Answer 7

I may have a solution for you, but we do not have a custom mirror available for the 1982 E-350. You might be able to make the CIPA #CM45000-2 work for you, but it would be the best solution we have available. I've linked some photos that show…

view full answer...

Answer 8

To fit the hose in the bumper you will have to take the orange collars off the ends of the RhinoFLEX hose. There should be side storage on your trailer that you can store these and other items in allow the hose by itself to fit as intended. This is…

view full answer...

What is the Top Bracket Bolt Spacing on CIPA Universal Door-Mount Replacement Mirrors

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching