Replacement Hub/Drum and Brake Assembly for AL-KO 7230 Hub/Drum Assembly
Question:
Hello, I have recently purchased a used Texas Bragg dual axle with 3500lb axles, angle iron frame and rails what brake hub setup would I need to replace the old brakes? They currently are inoperable as brakes. I found the Code AL-KO 7230 stamped on the hub. Regards
asked by: Doug R
Expert Reply:
From what I have found, the replacement for the AL-KO 7230 hub and drum assembly is the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-K.
For brakes, I recommend the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These self-adjusting brakes match your hub and drum assembly as well as your axle capacity.
I have attached a couple reviews and installation videos for your reference.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: al ko 7230
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Grease Seal, Inner Bearing, and Outer Bearing for an ALKO 7230 3500k Axle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Replacement Wheel Stud for AL-KO 7230 Hub
- Shop: Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Q&A: Replacement Hub/Drums & Brakes to Replace AL-KO 7230 Hubs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Install Instructions for Truck Bed Cargo Camera for 4.2" Factory Monitor # 3460002
- Q&A: Does Stealth Hitch SH23VR Fit 2015 BMW X1
- Q&A: How Does Aries Automotive Seat Cover Stay In Place on a 2018 Ram ProMaster 2500
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Article: Testing Trailer Brake Magnets for Proper Function
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Search Results: axletek
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: l44649
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Search Results: l68149
- Search Results: 10~36