WeatherTech BumpStep Hitch Mounted Bumper Step Review Video

A great roll-up tonneau cover for your 2019 RAM 1500 6'4" bed without Rambox is the Leer Soft Tonneau Cover - Roll Up - Vinyl and Aluminum #LE33VR. The Leer tonneau cover has the roll-up capability you want as well as the inclusion…

For your adapter from the 4-way to a 7-way, I recommend the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole #37185. This will give you the option of adding the 12V power, the brake controller output, and the reverse lights. Even if you don't…

The Curt Trailer Hitch Support Strap part #18050 is required to be used with all Curt Class I hitch receivers for all non-towing purposes. As you are using the hitch to secure a bike rack, you will need to use this strap to further support the load…

You can actually attach the Curt Stabilier Strap #18050 to the safety chain loops on your Curt trailer hitch. I reached out to Curt and they confirmed that this is how you want to use the strap when a hatch is not readily available (like on some…

Once the Curt trailer hitch #C13167 is installed on a 2016 Ford Transit Connect it will measure about 3 inches from the bottom of the rear bumper to the bottom of the hitch. If you measure from level ground up to the bottom of the bumper and subtract…

I reached out to my contact at WeatherTech regarding backup sensor interference with the BumpStep Hitch-Mounted Bumper Protector and Step for 2" Hitches #WT81BS1, and he advised me of no known issues with this matter.

Since you are looking for a step that can be used with your tailgate down, I recommend taking a look at the HitchMate Extendable TruckStep, #HE4045. This step was designed for that specific purpose and offers a support strut that extends step…

According to Rhino Rack, their available roof rack for your 2017 Sportage that uses the #RRSX023 roof rack feet isn't rated for a roof top tent. The good news is that Yakima has a rack that would work. The rack would consist of the following…

It sounds like you might be looking for a hitch mounted step. If that is the case we do have several options for this, like the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step part #WT81BS1XL you mentioned. I have attached a full list…

According to SMI Manufacturing, their #SM99243 Air Force One is compatible will any vehicle, which means it'll work just fine on your 2004 Jeep Liberty. I've linked you to some flat towing help articles you might find helpful.

I'd be happy to help! All of the hitches for your 2011 Honda CR-V weigh relatively the same when it comes to the different classes, and while the Class I hitches definitely weight lighter I recommend using a Class III hitch since they have a…

I have attached the installation instructions of the EcoHitch Hidden Trailer Hitch Receiver part #306-X7291 for a 2008 Honda CR-V to this answer page for you. In regards to installation, this is a bolt-on fit with a very clean finished install look.…