List of Available 2" Hitch Mounted Steps

Question

Question:

Hello Do you carry any type of Bump Step, similar to the one that WeatherTech sells? Thank you,

asked by: Capt. E

1

Helpful Expert Reply:

It sounds like you might be looking for a hitch mounted step. If that is the case we do have several options for this, like the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step part # WT81BS1XL you mentioned. I have attached a full list of options below.

expert reply by: Conner L

1

Answer 1

The GM 2 inch hitch part number 22956689 that you have would work great with the bumper guard part #WT81BS1XL that you referenced.

view full answer...

Answer 2

The main benefit of the Aluminum Wheelchair Carrier #FHG69ZR is the longer folding ramp and it will not rust. This carrier has a 60" folding ramp that will make it easier to load your wheelchair or other wheeled items. The Steel Carrier #FHG77ZR…

view full answer...

Answer 3

Great question! The ramp on the Flint Hill Goods 27" x 47" Cargo Carrier #FHG67ZR can be placed on either side of the carrier during the initial assembly. You can technically take it apart to swap the ramp to the other side when needed but…

view full answer...

Answer 4

The pins used in the latch hole on a trailer coupler are not actually holding anything together. They are simply an anti-theft mechanism which stops anyone from being able to open the latch and either uncoupling or coupling the trailer with the pin…

view full answer...

Answer 5

We carry the WeatherTech BumpStep Hitch-Mounted Bumper Protector and Step for 2" Hitches #WT81BS1 and recently added the BumpStep XL #WT81BS1XL which has a 24 inch length versus the 12 inch length.

view full answer...

Answer 6

I can tell you how far the Curt #C15400 extends out from the frame and you can use that to determine the measurement to the end of the service body. We don't have information on the RKI S6080 or a way to determine that distance otherwise. The…

view full answer...

Answer 7

The bottom of the Rhino Rack Vortex crossbars do have openings in them which can cause whistling. The openings are typically due to the measurement sections that get removed for securing the bar to the feet. Best solution is a fairing which will…

view full answer...

Answer 8

On the Buyers Products hitch, part #3371801102, the mounting holes are 38-3/8 inches across center on center. Then on each side starting with the hole that's towards the rear of the vehicle they measure 3-11/16 inches from the first to the center…

view full answer...

Answer 9

The warranty for the Trailer Valet RVR5, part #TVRVR5, includes a 1-year limited warranty. It covers any manufacturer defects with material or assembly. Wear and tear, damage from use, or damage from improper maintenance/repair are not covered.…

view full answer...

Answer 10

Yes, the Aries RidgeStep Running Boards - 6-1/2" Wide - Black Powder Coated Steel #AAC3696 will fit your 2020 Mercedes-Benz Sprinter 2500 with a 144" WB. One exception that Aries mentioned is the Sprinter models that have rear air…

view full answer...

Answer 11

Yes, the Demco 5th wheel Rail adapter #DM6175 fits into the OEM towing prep package in the 2019 Ford F-350 so you can use your Husky 26K 5th wheel hitch part #HT31318-32042. The Husky fifth wheel hitch mounts to industry standard rails. The Demco…

view full answer...

Answer 12

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

view full answer...

List of Available 2" Hitch Mounted Steps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching