Rhino-Rack Vortex Aero Crossbars Vortex Strip Replacement Review Video

The roof rack I recommend for a 2020 Jeep Grand Cherokee Trailhawk is the Rhino-Rack RVP Roof Rack part #RRRVP27. The Rhino-Rack RVP installs using fixed mounting points inside the flush side rails therefore you will get a very clean look with simple…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

I may have a solution for you but if you have the Model 3 roof rack by Tesla on your 2020 Tesla Model 3, then we do not have a channel cover specifically designed to fit your roof rack. If the opening in your roof rack is open then it will cause some…

I went out to our demo area and measured replacement strip #RRM626. It is 7/8 inches wide at the top, 1/2 inch wide at the bottom, and 3/16 inches tall overall. I have included a picture showing the dimensions for you.

For a 2012 Mitsubishi Outlander Sport with the flush-mounted rails, all you would need is the Rhino Rack crossbars, part #RRVA126B-2 and the #RRSX031 leg kit. The leg kit is designed to attach directly to the flush mounted rails, and no fit kit is…

We had a similar issue here with an employee here and what he ended up doing was getting a second narrower fairing to attach to the lower section of the main fairing to bridge the gap between the fairing and the roof. Since the Rhino Rack fairings…

I have a solution for you, but we don't offer a single, continuous pad that will work for your roof bars. For your setup, I recommend two sets of the Rhino Rack Sup pads with tie downs, part #RRRWP05. These 33-1/2 inch wide pads will provide a…

I don't know what roof rack you have but if you are missing the strip for the crossbars that covers the channels that would be why it's whistling. If you have Rhino Rack Vortex aero bars the part #RRM626 would be what you'd need to cover…

If a roof rack is whistling and there is a channel on it that is exposed the solution is adding more of the rubber strip to cover the hole. For that you would want the part #RRM626 which is 15-3/4 inches long but can be cut to size as needed.

We certainly do! If you live nearby, or will be traveling near the Wentzville MO area, we'd be happy to install a hitch for you. Give our Customer Service folks a call for an appointment or for more details.

You'll be able to use almost any replacement strip as they are almost always fit for a 3/8 inch channel. I specifically recommend the Thule Replacement Channel Cover 59 inch, part #852-5402-005 or the Rhino Rack Vortex 15-3/4, part #RRM626. These…

For your Undercover SE Tonneau cover on your 2019 Chevy Colorado you can use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long #Y02-490B will work by simply trimming the tracks as you mentioned. There…