Demco SMI Air Force One Braking System Air Valve Cap Review Video

The switch on the actuator for the Air Force One #SM99243 is a reed switch. It detects the presence of a magnet on the inner part of the actuator. When the magnet is near the switch the light is off. If you removed the reed switch and used a magnet…

We do offer the replacement reed switch separately for the Demco Air Force One Supplemental Braking System #SM99243. The correct part is the following: - Replacement Reed Switch with Mounting Strap #DM65MV

The recommended PSI for The Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle #AL57531 has a minimum recommended pressure of 5 PSI and a maximum air pressure of 100 PSI. I attached a review video link below.

Yes, we do have replacement vinyl caps for your SMI Air Force One Supplemental Braking System for Motor Homes with Air Brakes #SM99243. For the RV side you will want the Cap part #SM99609 and for the vehicle side you will want the Cap part #SM99608.

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

The Demco Breakaway Switch Pin part #SM99905 is only available in white.

They are not interchangeable but we do have a replacement jumper air hose for the SMI Air Force one with the part #SM99666 if you wanted a backup.

We do offer a way to order replacement arms for the Roadmaster base plate kits with the #RM-ARMS.

From what I can gather, you have a Roadmaster tow bar with a crossbar mount and are looking for crossbar-style base plates for your 2017 Ford Explorer Sport. So long as you have the 3.5L EcoBoost, there are two fits for crossbar-style base plates on…

We have the correct replacement breakaway switch pin for the Demco Air Force One with the part #SM99905 which isn't black but it is the correct and only replacement we can recommend.

Yes, the Camco RV and Marine Disposable Water Filter w/ Hose Protector #CAM40043 that you referenced uses KDF, carbon, and a 100 micron barrier to remove bacteria, bad odor, chlorine, etc. so it would work well for you.

When using D-ring adapters, like part #BX88357, to flat tow your Jeep you generally need to connect the safety cables to the Jeep's frame. One way to connect to the frame using cables like #RM-643 is to add extensions #RM-910648-20.