DeeZee Specialty Series Trailer Tongue Toolbox Review Video

The dimensions for the RC Manufacturing Trailer Tongue Box are; width at back is 36 inches, width at front is 21-1/2 inches, the height of the box is 20 inches and the depth of the box is 16 inches. You can see these dimensions in the photo I have…

I recommend starting off by measuring to see exactly how large of a toolbox that you will need. I have included a link to all of our A-frame toolboxes for you to take a look at. Two of our largest boxes are the DeeZee Specialty Series Trailer…

The DeeZee Specialty Series Trailer Tongue Toolbox, #DZ91717P, is 36 inches wide at the back of the box. I have attached a picture showing the dimensions of this box for you. You mention the specs showing 30 inches but I am not sure where that…

Trailer tires that are the same size but with different load ratings will have different capacities. A load range C tire will have a higher capacity than a load range B tire of the same size. The Kenda 4.80-12 Bias Trailer Tire with 12 Inch White…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

Since you are not wanting to drill all the way through the aluminum frame on your H and H trailer, you can use U-bolts like #CE15283GA-2 to go around the frame of your trailer, and up into the RC Manufacturing T-Series Trailer Tongue Tool Box -…

I pulled the Rack em Magnum Wheel Lock, #RA-25, and found that it measured 1 inch x 7/8 of an inch at its narrowest point at the end of the arms. It would be difficult for a thief to use bolt cutters to cut through the arms of this wheel lock and…

I can pass along your lock concerns to the manufacturers. Any lock can be defeated given enough time and persistence. A wheel lock such as #RA-25 is a deterrent, as all locks are. If a thief wants that trailer bad enough, they'll find a…

I went out to the warehouse and pulled a Rack'em wheel lock #RA-25 to measure it. You will be able to use it on a tire that is 12-1/2 inches wide provided the tire is on 15 to 20 inch wheels. The size in question would be the wheel diameter.

My technical contact at Rackem earnestly believes even if a thief deflated the tires on the trailer that the Rackem Magnum Wheel Lock #RA-25 would not be defeated. This lock clamps onto the actual wheel of the trailer and does so extremely snug. With…

I recommend the Adco Ultra Tyre Gard tire covers, part #290-3973 in black or #290-3953 in white. Your 205/75-15 size tire is just over 27 inches in diameter so these will fit nicely. These will do a great job protecting your tires from the elements…

The ST205/75R15 tire size translates to an overall diameter of just over 27-inches when mounted and inflated. For this tire diameter we offer three black covers that will fit. Part #052963753479 from Classic Accessories is a universal-fit cover that…