Curt Stretchable Cargo Net Review c18202 Video

The Firestone 1/4" Air Line Tubing part #F99ZR can safely handle up to 150 psi.

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

I recommend using the EcoHitch Hidden Trailer Hitch Receiver #306-X7372 to carry a bike rack and cargo carrier with your 2020 Honda Odyssey. The receiver itself may not sit lower than other models, but since the crosstube doesn't sit below the…

The Kuat Transfer V2 Bike Rack for 4 bikes part #KU77FR is essentially the 3 bike version #KU24FR with the add on #KU57FR.

The Reese Cargo Net part #H9500100 would work great for a cargo tray that matches the dimensions you listed of 50 inch by 60 inch. This net is 36 inch by 48 inch unstretched so stretched out the dimensions of your rack it would give a nice snug fit.

The EcoHitch part #306-X7372 (and all hitches that fit your vehicle) will affect the hands free liftgate sensor of your 2019 Honda Odyssey but the feature will not be lost. You'll just need to kick to either side of the hitch opening and it will…

I have some great news! The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7372 you were looking at is confirmed to fit your new 2022 Honda Odyssey. This is a great option due to the hidden crosstube meaning only the…

There is a waterproof cargo bag that is perfect for a 59 or 60 inch hitch cargo carrier, which is a bag from Curt: - Curt Cargo Bag for Hitch Mounted Cargo Carrier #C18211 This bag measures 56" long x 22" wide x 21" tall and uses six…

Exhaust melting cargo on a cargo carrier isn't a super common problem, but we are aware that it does happen on occasion. Especially if the cargo carrier is at the same height as the exhaust, relatively close to it, and/or the material in the…

Hitch bike racks including those from Thule and Yakima are made to fit either a 1-1/4-inch hitch, a 2-inch hitch or based or their design sometimes both sizes. To illustrate, Thule hitch racks for both hitch sizes are shown on the linked page. The T2…

The 3 inch dimension that needs to be cut from the rear bumper to install the etrailer.com hitch part #E98848 that you referenced is measured from the edge of the fascia and matches the angle of it. So the square cut would measure 3 inches. If you…

The primary difference between the #TH9028XT Vertex and the #TH9024XT Apex is that the Apex features some improved features like an easier to use locking/anti-rattle system and an upgraded and easier to use cradle system. The upgraded locking system…