Bulldog Trailer Winch with Mounting Plate Review BDW15019 Video

The Superwinch S5500 Trailer Winch #SW1455200 mounting bolt holes are separated apart by 3-3/4" on center (see attached photo). Attached is a review video for you to reference as well.

The Bulldog Winch Trailer Winch #BDW10039 is 24" long x 7-1/4" wide x 7-1/4" tall so it will have no issues fitting on your recessed plate on your trailer. The winch includes a mounting plate that is 20" long and 7-3/8" wide.…

Pulling cars onto a trailer will undoubtedly require pulling the vehicle up an incline, which will add extra resistance to the equation. If you are pulling a rolling load, not dragging the car and no flat tires, up just a slight incline like a 3…

The holes on the mounting plate for the Bulldog Winch #BDW15019 are spaced 3-1/8 inches x 4 inches center on center. The winch mounts to the plate in holes that are 6-5/8 inches x 3 inches apart center on center. I have attached a photo showing these…

For a cost-effective powered car trailer winch you can consider the Bulldog Winch #BDW15019 which includes a roller fairlead and wire rope. This winch offers a 2-minute duty cycle (15 minutes of cool down time is required between cycles) and with a…

It sounds like you're looking for an electric winch for your car trailer. I recommend the Bulldog Winch Trailer Winch - Wire Rope - Roller Fairlead - 4,400 lbs #BDW15019. This has a static load of 4,400 lbs and a rolling load of 44,000 lbs. If…

Good news! The Bulldog Winch #BDW15019 will work great for loading your 18 foot car hauler with a vehicle up to 4,000lbs. We recommend using a winch with a line pull capacity no less than equal to that of the load being moved. For example, if a car…

The Bulldog Winch part #BDW15019 would easily pull a 2,500 lb race car into an enclosed trailer. It has a 4,400 lb capacity which would make easy work of that weight. Bulldog winches are very reliable too. What a lot of people do to mount a winch to…

Anchoring the E-Track Trailer Cargo Control, item #EM59150, is situational so there are no manufacturer recommendations. For your situation I would recommend securing the plywood to the trailer frame in as many points as possible. Before adding extra…

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with the…

You can put a maintenance charge on your trailer battery with the 12 volt accessory circuit of the 7-way. The 1:00 position of your 7-way carries this circuit. You would just need to run a length of 10 gauge wire like part #10-1-1 (sold by the foot),…