Blue Ox Ascent Non-Binding Tow Bar Review Video

To flat tow your 2004 Jeep Grand Cherokee, you will need a base plate kit, a tow bar, safety cables, towed vehicle wiring, and a supplemental braking system. It is also likely that you will need a wiring extension to connect the RV's wiring…

The Blue Ox tow bar adapter that will fit your new EAG JJKFB021 Bumper are the Blue Ox Aftermarket Off-Road Bumper Adaper - 7/8 Inch Pin #BX88357. I was able to confirm that the d-rings on your aftermarket bumper use a 7/8 inch pin and have a 1…

Both tow bars you referenced will work with the Blue Ox base plate kit part #BLU93FR that you just bought. The biggest difference will be that the Avail part #BX7420 is designed to allow for better maneuverability in tight turns. This is accomplished…

The bump or dip in the road would have to be fairly severe for the ramps on tow dolly #RM-2050-1 to make contact with the bottom of your 2018 Volkswagen Golf. The ramps are not all that long and the dolly and vehicle will move up and down with the…

For the factory powder coated steel bumper on the 2023 Ford Bronco Wildtrak you would need the Roadmaster Direct-Connect Base Plate Kit #RM92ZR. Unfortunately this baseplate mounts in place of you D-Rings, as well as all other compatible options, so…

Yes, I checked with Blue Ox and the #BLU77XR that you referenced does fit the Tremor model of the 2021 Ford Ranger that has the skid plate.

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

I can help you pick out all of the parts needed to flat tow your 2019 Ford Ranger but we do not have a single part number kit that comes with everything. So the first thing you need is a base plate kit which for that you'd want the part #BLU77XR…

Actually, I'd recommend the Roadmaster #RM-077-2 Dual Hitch Receiver you'd already looked at. This adapter is specifically designed for flat towing a vehicle, so it won't lower the capacity of your hitch. If the 2-1/4 inch drop will place…

To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers #Y28TR, #Y03536, #Y06124 since you already have the crossbars. Normally you'd additionally need the part #Y00408.

The difference between the #RM-195125 and the #RM-195225 is that they are designed for different sized wheels; the #RM-195125 is designed to handle up to 16.5" tall wheels where the #RM-195225 can hold between 16" and 24.5" tall…

The Battery Disconnect part #RM-766 installs on the positive battery wire so that when activated all power is cut for the vehicle. See attached chart. What you would need to do is install the #RM-766 after the connection you have for your Brake Buddy…