Hopkins Trailer Wiring Harness Installation - 2019 GMC Canyon Video

When it comes to installing a 7 pin connector on your 2021 Ford Bronco with LED Taillights you first will need The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C42WR. Next you will need The Universal Installation Kit…

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

We don't have any fit notes for having to drop the fuel tank of your 1996 Ford Bronco to install a Class III hitch like the #75038. I did some googling and found that one guy had to fishwire his hardware through the frame to get around the fuel…

On your 2002 Ford F-250 you will need to connect the Red wire to the Black wire on the brake controller for +12 Volts power and the Light Green wire to the Red Stoplight wire on the brake controller. The Dark Blue wire is connected to the Blue wire…

Your brake lights and turn signals for each side are on one circuit. The left side turn signal and brake light is generally the yellow wire going into your trailer connector. The first thing to do is check the fuses on your tow vehicle. Next, inspect…

It is possible that there is a blown fuse or relay related to the tow package wiring that is causing the problem. Use the vehicle owner's manual to find the locations. It is also possible that there is a break in the wire somewhere. You will need…

From the information I can find I believe your 2019 GMC Acadia will have the wiring routed back towards the rear of your vehicle whether you have the factory tow package or not (see attached photo). If you check up under the rear bumper of your…

For your 2019 Toyota Tacoma with a bed rail system the Swagman Patrol part #S64701 is a confirmed fit that would work well. This will attach to the bed rails and give you two fork mounts for bikes to attach to.

I would be happy to help you. I have attached a picture of the Curt Trailer Hitch Receiver item #C13176 attached to a 2016 Chevrolet Colorado. You can see that the spare tire support brace is still attached on the bottom right side of picture. I have…

The blue wire is the trailer brake feed that is wired to the trailer connector at the back of the vehicle. A 10 gauge wire, item #10-1-1, is used for this connection. The red wire is connected to the cold side of the brake pedal switch. Use a circuit…

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

Yes, the copper side should be connected to the battery, the chrome side should be the output to the brake controller, trailer battery, etc.