Trailer Wiring Harness Installation - 2018 Nissan Rogue Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I understand your concern and I don't want to just dismiss it, but the situation you described is not going to happen if you install the Trailer Wiring #118480. If properly route the power wire of this would not wear through. And if that…

The 12-volt trailer feed, which is the pin that sits in the 1:00 position if you're looking at the front face of the 7-way connector on the vehicle is fed by the vehicle battery. If this connection isn't already made on the vehicle side, run…

Technically you could wire a powered trailer wiring harness such as #C56033 to a separate 12 volt battery. However, without an alternator to maintain the charge of the battery, the trailer lights would drain the battery and you would not know it. It…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to add lights to your Kuat Sherpa bike rack, I recommend the #C53201 Curt Auxiliary LED Indicator Lights. These lights have a 3M adhesive backing for secure, convenient mounting on a variety of surfaces including your bike rack. Just stick…

The etrailer.com hitch part #E98846 is the hitch I recommend for your 2018 Nissan Rogue that has the handsfree lift gate sensors and back up camera. While Nissan recommends a special harness to allow the sensors to still work after a hitch install…

The hitch fits are different between the Sport model 2019 Nissan Rogues and the non-Sport models. So what you'd need is the part #76177 for a Class III 2-inch hitch that fits your 2019 Sport model. This has a concealed crosstube which allows it…

The Sport versions of the 2018 Nissan Rogue actually require a different hitch fit. Instead you'd need the part #76177 which does accommodate the frame differences you mentioned.

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98846 does not require the exhaust to be lowered during installation, so it's exactly what you're looking for. I really like the matte black finish…

The etrailer Trailer Hitch Receiver #e98846 will have a larger notch for the exhaust hanger on your 2011 Nissan Rogue that is coming into contact on your Draw-Tite Hitch #75902. I felt that the best way to show you is with a picture that I have…

A Class I trailer hitch is limited to carrying a maximum of two bikes so you will not be able to use your Thule 4-bike rack with the hitch that is currently on your 2018 Nissan Rogue; you will need a new trailer hitch. The best trailer hitch for your…