Tekonsha T-One Vehicle Wiring Harness Installation - 2018 Nissan Frontier 118266 Video

Yes, you can use the socket, #HM40975, from the #HM40975-11933 kit as a replacement 7-way and 4-way trailer connector on your 2011 Ford F-150. The plug-in adapter that comes with this kit is only designed for Dodge and Chrysler vehicles, but you can…

The part #HM40975 is a replacement 7-way and 4-way that will connect to the round connector you have at the rear of your 2014 Toyota Tacoma. If you needed to hardwire the connector as well you would want the part #HM40975-11998 instead.

Installation of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56225 that fits your 2019 Nissan Frontier (without a factory connector) is very straightforward, but installing a harness on a Nissan does require the use of…

The eTrailer.com Trailer Hitch Receiver part #E98869 and the Curt Trailer Hitch Receiver part #13241 which are both a fit for your 2018 Nissan Frontier have the same shape/design/capacity but are not exactly the same. The difference between them is…

If you want to use the Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional #RED44FR, you will need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers #RED39FR

If you already installed the 4-Way Curt Wiring Harness #C56225 on your 2011 Nissan Xterra, you will only need the Replacement Wiring Harness #118267. You will not need the full 7-Way T-One Vehicle Wiring Harness #118266 as you already have the relays…

Your 2020 Chevy Traverse is prewired for a brake controller. Instead of a connector, there are 4 blunt cut tow package wires located under the dash below and behind where the headlight switch is located. These wires will directly connect with the…

For your 2022 Nissan Frontier, I recommend Wiring Harness #C56225. As far as a hitch goes we do have a few options for your truck, however, I recommend one of best sellers, the etrailer Trailer Hitch Receiver #e98869. This is a custom made class III…

There is a wiring kit that has both the 7-way and the 4 pole, if your truck already has a 7-way installed on it. You could remove the existing 7-way by unclipping it from the trailer wiring harness and replacing it with the #HM40975. If your truck…

I've included the link to one of our installation videos on the 2019 Nissan Frontier that uses the Curt #C56225, which comes with the relays included; these relays can also be purchased with the Curt Relay Kit #59700. If you fast forward to…

You can indeed test a trailer's electric drum brakes by directly applying +12V power from a fully-charged battery. You can apply this power to the hot and ground contacts on the trailer's plug (see photo please) or to an individual brake…

The mounting bracket included in Hopkins 7- and 4-Pole Trailer Connector Socket part #HM40975 is available separately as part #HM40978. This part includes the bracket and 2 mounting screws. The linked photo shows the measurements of the bracket…