Hopkins Tail Light Wiring Kit Installation - 2015 Jeep Wrangler Unlimited Video

I wish it was that easy! But no you can use the tow loops in place of a base plate kit like the Blue Ox part #BX1133.

I was able to confirm with my contact over at Hopkins, who manufacture the Brake Buddy Classic 3 #HM39494 that you will want to use the standard setting with your 2017 Jeep Wrangler. You would only want to use the "hybrid" setting with an…

The Brake Buddy Select 3 part #HM39524 like you have plugs into a power outlet in the tow vehicle to power the brake setup. So what that means is that it's draining your vehicle battery as it's being used. Using a fuse bypass won't…

It sounds like you may have a 7-way trailer connector and a 4-way trailer connector on your truck and only a 4-way connector on your trailer. Is that correct? See the attached picture for examples of each. If this is the case, then this change will…

Looking at the installation instructions for base plates #RM-521448-5 you will need to remove the air damn, trim it according to the instructions, and then reinstall it. Trimming is needed for proper installation of the base plates.

I spoke to my contact at Roadmaster and we came up with a solution for you. It will require a little bit of fabrication but it should work. What you will need first is the Roadmaster MS Base Plate Bracket part #1437-3. You will need to remove the…

Sure thing, I'd love to get you all set up and in your way! For your 2015 Jeep Wrangler Unlimited with a stock bumper, you're going to need to grab a set of wiring #RM-154, tow bars #RM-676, a braking system #HM39524, and a base plate kit…

We do have the correct fit for your 2010 Jeep Wrangler JK with the factory bumper, but the part you mentioned is not a fit for the stock bumper. I verified directly with Roadmaster that the correct base plate for your Jeep is the following: -…

If that aftermarket bumper is a Warn Rock Crawler number 74255 then yes, there are some base plates that will fit! Or if it is a Warn/Mopar bumper, part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or 82210401AB…

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

I spoke with my contact at Roadmaster regarding the InvisiBrake Supplemental Braking System #RM-8700 that you have installed. He stated that depending on your vehicle, priming the brake pedal in order to build the necessary pressure is completely…

The braking pressure that the Invisi-Brake System #RM-8700 that you referenced comes from the factory set at is the most universal setting that works for most applications, 60 psi. You will want to test your setup using the preset setting and compare…