Trailer Hitch Installation - 2016 Toyota Tacoma - Draw-Tite Video

Yes, the Curt Trailer Hitch Receiver #C13264 is confirmed to fit your 2017 Toyota Tacoma. We have not had the chance to make a video on a 2017 as of yet but it is manufactured for both model years. The wiring harness to install a 4-way trailer…

The main difference between the Curt #C13264 and the etrailer #e98905 hitch receivers lies in the superior matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend #e98905 because the…

If you want a fully functioning 7-way on your 2019 Toyota Tacoma you can use part #22117. This includes everything you need including the wiring to install a brake controller which you don't need since your trailer doesn't have brakes. If you…

For your 2022 Toyota Tacoma I recommend the etrailer Trailer Hitch Receiver #e98905. This is a custom-fit Class III hitch with a 2" receiver. It features a matte black finish for a rugged look and corrosion resistance. It has a maximum gross…

There is not a rule on how much clearance you need. It really comes down to the terrain you are driving over. For general use however having 10-11 inches of clearance will be sufficient when using the B&W Tow & Stow 2-Ball Mount part…

The best trailer hitch that fits your 2016 Toyota Tacoma is the Curt #C13264. It's a Class III, 2 inch hitch that bolts right onto the truck's frame. All of the necessary hardware is included. If you're going to be towing with your truck…

The dimensions of the Replacement Upright for CE Smith Bunk-Style Guide-Ons #CE27605PG are 39 inches tall by 23 inches long. The tube is 1-1/2 inches and the bend is a 90 degree angle. I've attached a picture for you as well.

The hitch I recommend for your 2016 Toyota Tacoma is the Curt Trailer Hitch Receiver part #C13264. The distance from the ground to the top of the inside edge of the receiver tube opening on the Curt hitch was 19" when we installing it on a…

Some trimming of the rear fascia on your 2020 Honda CR-V is indeed required when installing the etrailer Trailer Hitch Receiver #e98848 to allow clearance for the drop-down receiver. You will just need to use some shears/snips to trim about 3" x…

We have a really great solution for a lock for the latch of the Demco Coupler part #DM12925 that you referenced with the Bulldog Lifelong Trailer Coupler Lock #BD580403 that fits tight to the coupler trigger making it very hard to get into. The span…

We have the MasterLock Trigger Style Coupler Lock part #605DAT which has a span of 3/4 inches like you said you need that would work well. You are correct and the tighter the latch opening is to the trigger latch of the coupler the harder it would be…

I recommend using the Draw-Tite Front Mount Trailer Hitch Receiver #65070 for your 2019 Toyota Tacoma because it has the highest weight ratings which indicates a stronger hitch. This has a 2" receiver and is a custom fit so it doesn't…