Trailer Hitch Installation - 2013 Honda Odyssey - Draw-Tite Video

For your 2013 Honda Odyssey the best deal for a Class III hitch is the Draw Tite part #75270. The price is great and the Draw Tite hitch has an incredible amount of positive reviews from our customers who have installed and used it. I also attached…

There isn't a plug and play option for a 7-way available, but we have the parts you'd need to complete the installation. You'll need to begin by installing a 4-pole trailer connector. There are two iterations of a 4-pole harness available…

The only way we offer to install a 7-way in your 2013 Honda Odyssey is with an adapter like part #ETBC7 as there isn't a direct plug in harness available. You would need to start with a 4-way if you don't have one already. For that you would…

The towing capacity of a 2004 Honda Odyssey is 3,500 lbs. If you are on the original transmission of the vehicle and it's never been rebuilt you'd be asking for trouble towing with your vehicle but a transmission cooler like the #D13502 would…

I suspect your issue is related to the red wire of the controller. It needs to be connected to a circuit that only sees 12 volts when the brake are depressed. My theory is yours is connected to at circuit that is hot all the time but you can test the…

There is a bike rack that will work with your 2018 Trek Fuel EX 8 mountain bike with a 49 inch wheelbase but the Thule T1 will not; trying to squeeze a bike that has a wheelbase which is too large will result in your bike not being properly secured.…

There should be a 7.5 amp fuse that will need to be installed in the fuse box when you install the T-One Vehicle Wiring Harness #118336. You will need to check with your local regulations and laws to determine if you need to have side clearance…

As you can see by the photo I have edited for you, the Draw-Tite and Curt hitches available for your Odyssey are all pretty similarly designed. When we installed both hitches on a 2013 Odyssey, we found that the Curt #C13068 had about a 1/2 inch…

Instead of replacing both the 7-Way blade-style connector as well as the 6-Pole square connectors, #37995, I recommend using a 7-Way connector and junction box to make the connections for your trailer. This will eliminate the additional, unnecessary…

The Draw-Tite Class III hitch you referred to, part #75270 uses Class 8.8 M12x35mm bolts with a 1.25 thread pitch. The bolts would fasten to the weld nuts that are welded to the inside of the frame members. When you install the hitch, take some time…

Since the load you will be towing is nearing the top of your 2003 Honda Odyssey's towing capacity, I recommend using the Derale Series 8000 Plate-Fin Transmission Cooler Kit #D13503. This cooler measures 11 inches wide x 8-3/4 inches tall x 7/8…

Once installed, the only portion of the Draw-Tite #DT68MR Class III hitch that will be visible from the rear is the receiver tube and the safety chain loops as you can see in the photo I fetched from the instructions. You will need to do some…