Recommended Hitch with Best Ground Clearance for 2013 Honda Odyssey
Question:
I am going to buy a hitch for my new Odyssey. I want a class 3, 2inch receiver. I want to have as much ground clearance, and space from the back of the bumper as possible so I wont be kicking into it while loading the van, and so it will be less likely to drag over uneven surfaces like exiting driveways. Which of the models you sell will give the most ground clearance from the lowest point to the ground? Thanks for your help!
asked by: Gary B
Expert Reply:
As you can see by the photo I have edited for you, the Draw-Tite and Curt hitches available for your Odyssey are all pretty similarly designed. When we installed both hitches on a 2013 Odyssey, we found that the Curt # C13068 had about a 1/2 inch greater ground clearance (12-1/2 inches) versus 12 inches for the Draw-Tite # 75270 models.
The receiver of the Draw-Tite hitches are recessed a bit more under the vehicle, but neither of the hitches will extend past the bumper, and therefore there will be no danger of banging your shins or knees on it.
Since ground clearance seems to be a priority for you, I would recommend the Curt Class III, part # C13068.
To complete your towing system, you might also need the following:
Trailer wiring harness with 4-pole connector, part # 118521
Ball mount, part # 2753
2 inch trailer ball, part # 19247
1-7/8 inch trailer ball, part # 19260
2-5/16 inch trailer ball, part # 63847
I have linked you to the installation instructions and install videos for the hitches as well as the trailer wiring harness.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Platform Bike Rack Recommendation for 2013 Toyota Corolla S
- Video: Trailer Hitch Installation - 2013 Toyota Corolla - Draw-Tite
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Suspension Enhancement
- Video: Trailer Hitch Installation - 2016 Honda Odyssey
- Shop: Transmission Cooler
- Shop: Timbren Rear Suspension Enhancement System
- Search Results: transmission coolers
- Search Results: trailer hitch wiring
- Search Results: drop hitch
- Search Results: 4 inch drop hitch
- Search Results: tow hitch
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2015 Honda Odyssey
- Search Results: hitch safe
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56378 Review
- Video: Trailer Wiring Harness Installation - 2012 Honda Odyssey
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: ez hitch
- Shop: Roof Rack
- Shop: Towing Mirrors
- Video: Trailer Hitch Installation - 2013 Honda Odyssey - Draw-Tite
- Video: Curt T-Connector Vehicle Wiring Harnes Installation - 2013 Honda Odyssey