Trailer Hitch Installation - 2012 Honda Odyssey - Draw-Tite Video

From what little I was able to learn about the VelociRAX 5 bike rack on their website, the rack is compatible with a 2 inch hitch that has a tongue weight capacity of at least 500 lbs, and the Draw-Tite #75270 Class III hitch meets both those…

For a hitch with a high enough tongue weight capacity you will need the Draw-Tite Max-Frame Trailer Hitch Receiver #75270. Although the #e98862 does have a max tongue weight of 500 lbs with weight distribution, this would require a weight…

In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part #76025 on a 2014 Honda Odyssey you"ll need to trim the fascia in the center to allow the receiver tube opening to pass through and above the tail pipe. The reason you must…

Just to make sure we are accurate on the actual rise you may need, lets cover some basics. With the tow vehicle parked on level ground, measure from the ground to the top of your hitch receiver opening. Then, with the trailer level, measure from the…

The primary difference is a matter of numbers. When installed, the Draw-Tite Class III #76025 will sit so the inside top edge of the receiver tube sits about 13 inches above the ground, and the receiver tube will sit under the bumper so that the…

When we installed the Draw Tite hitch part #75270 on a 2011 Honda Odyssey the distance from the ground to the top of the hitch opening was 12 inches. When we installed #76025 the distance was 12-1/2 inches. The Curt #C13068 was 12-3/4 inches. Draw…

I have added a link on this page to the installation instructions for the EcoHitch Hidden Trailer Hitch Receiver #306-X7253 for you to check out. The installation of this hitch, which does fit your 2014 Honda Odyssey, is a complete bolt-on…

Most ball mounts, like the Draw-Tite #2753 can be used in both a rise (upside down) and drop (standard) position. I'm not seeing any Curt ball mount with a part number 45836, but as I mentioned, most ball mounts are designed to be used either…

Yes, both the Curt Hitch #C13409 and Wiring #C56040 will fit great on your 2023 Subaru Forester Wilderness model. I also recommend picking up the Mounting Brackets #C42CR and #C57202 so your wiring connector is readily available next to your hitch…

I attached a link to the install video for the Draw Tite hitch part #76025 as well as a link to the install instructions for you to check out as well.

I spoke with my contact at Tow Ready and he informed me that you can run the Tow Ready Custom Fit Vehicle Wiring #118521 either through a grommet in the floorboards to the outside of your vehicle, or you could keep it inside the cargo area when not…

Although Tow Ready hasn't done an install on an Odyssey that's equipped with the HondaVac option, I was able to obtain some very welcome feedback from one of our Customers who recently installed the #118521 on his 2015 Odyssey SE with the…