How Long Does It Take To Install The Timbren TDRTT3500E On A 2022 Ram 2500

Question

Question:

HOW LONG DOES IT TAKE TO INSTALL THIS KIT ON A 2022 RAM 2500 4X4 ON A TRUCK RACK? PARTS NUMBER TDRTT3500E CUSTOMER IS SEVERLY OVERLOADING THE VEHICLE CURRENTLY.

asked by: Terry W

0

Expert Reply:

Installing the Timbren # TDRTT3500E on a 2022 Ram 2500 is going to be a very simple no-drill process. Once the truck is on a lift, it may take all of 15-20 minutes to get them installed. We do encourage you to note to this customer that Timbren springs will not increase your vehicle's weight-carrying capacity, and not to exceed the manufacturers recommended weight capacity.

I have linked our install video below if you want to take a look at the process.

expert reply by: Jesse M

0

Answer 1

Yes, to both of your questions. The SumoSprings Rebel Custom Helper Springs item #SS64VR you referenced do fit your 4WD 2022 Ram 2500 and are compatible with in bed hitches. These helper springs have a 3,000 lbs load leveling capacity.

view full answer...

Answer 2

The SumoSprings are definitely the best choice for your 2022 Ram 2500. The Timbren will give you a rough ride when unloaded while SumoSprings have a minimal impact on unloaded ride quality. Also, the #TDRTT3500E is a severe service kit. The only…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How Long Does It Take To Install The Timbren TDRTT3500E On A 2022 Ram 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching