T-One Vehicle Wiring Harness Installation - 2013 Volvo XC60 Video

The #118739 Tekonsha T-One harness and #C56355 Curt T-Connector harness are both custom fit for the 2017 Volvo XC60. The installation is the same for both. The Curt has a powered converter using SMT and the Tekonsha has a powered ModuLite…

For the most part the Curt #13268 and the Draw-Tite #75671 and #76116 are going to be the same hitch; they're all square tube designs and provide you with a 2" receiver. I generally prefer Curt hitches when available since…

You are able to plug a 5-Way flat trailer connector into a 4-Way flat but the 5th function on the trailer side will not work. The 5th function is usually for an electric reverse lockout on a surge coupler. A surge coupler is used with hydraulic…

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56355 you referenced is a compatible fit for your 2016 Volvo XC60. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in…

It's really pretty hard to pick between the three hitches that are available for your 2011 Volvo XC60 as they are all very similar in all of the important criteria. The prices are very close, the capacities are the same, the designs are…

We've had customers install the Stealth hitch part #SH87FR on the 2020 Volvo XC60 and let us know that the hands free function still worked. They said the spot they had to move their foot was on the driver side of the hitch.

The Stealth hitch that fits your 2018 Volvo XC60, #SH87FR, will allow your hands free liftgate to still function. You'd just have to kick to the sides of the hitch opening and it will open. I attached an install video for this hitch for you…

The Curt trailer hitch part #13268 that you referenced has been confirmed as a fit for your 2015 Volvo XC60 and does not require any welding or drilling. I attached an install video for you to check out as well.

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

The torque value for your 1-7/8 inch ball is going to depend on the diameter of the shank. Draw-Tite lists the following torque specs: "During hitch ball installation, torque all 3/4" shank diameter balls to 160 ft. lbs., and…

The trailer wiring harness #118739 was only tested and rated for use when connected to the vehicle battery as indicated in the instructions I have linked. You should not use any other power source because it, too, is not rated for this purpose so…

I have a solution for you, and because U-Haul hitches are just Draw-Tite hitches that have been re-branded we can narrow down what you've got; however, the 75316 you've mentioned is not a hitch that has been confirmed for your 2017…