Trailer Hitch Recommendation for a 2015 Volvo XC60

Question

Question:

I would like a no drill/no weld trailer hitch for my 2015 Volvo XC60 T6 Platinum AWD. Please could you tell me what will fit? Im getting conflicting reports as to what will work without drilling or welding. Thanks.

asked by: Roger W

0

Expert Reply:

The Curt trailer hitch part # 13268 that you referenced has been confirmed as a fit for your 2015 Volvo XC60 and does not require any welding or drilling.

I attached an install video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For the most part the Curt #13268 and the Draw-Tite #75671 and #76116 are going to be the same hitch; they're all square tube designs and provide you with a 2" receiver. I generally prefer Curt hitches when available since we've found…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver - Class III #13268 is a fit for your 2015 Volvo XC60. We do not have a video of a 2015 model, but I've attached videos for both a 2016 and a 2014 model to assist. Your heat shield must be modified or trimmed for…

view full answer...

Answer 3

If you do not have an R-Design model 2015 Volvo XC60 then you should not have to trim the rear fascia (heat shield trimming under the vehicle is still required). Take a look at the installation instructions I have linked to the right for more…

view full answer...

Answer 4

The installation procedure for the Curt Class III #13268 and the Draw-Tite #75671 are identical for all intents and purposes. The differing install difficulty ratings reflect each manufacturer's opinion of how difficult the hitches are to…

view full answer...

Answer 5

The Curt trailer hitch part #13268 fits all models of the 2017 Volvo XC60 including the all wheel drive models like what you have. The heat shield does need to be trimmed to install this hitch as well. If you fast forward to the 2:30 mark of the…

view full answer...

Answer 6

When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot…

view full answer...

Answer 7

We have a way to order all new hardware for installing our trailer hitches with part #RHK. What you'll need to do is enter the part number for the hitch you have and then select Curt from the drop down menu and we'll ship you out the correct…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Trailer Hitch Recommendation for a 2015 Volvo XC60

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching