Konig Self-Tensioning Snow Tire Chains Installation - 2015 Jeep Grand Cherokee Video

In general, snow tire chains are generally placed on drive wheels, but they can sometimes also be used on non-powered wheels. If a vehicle is front-wheel-drive only, then generally the front tires are the priority but it is permissible to place them…

We have the exact set of chains you are looking for. For your tire size of 265/60-18 we have the exact XG-12 called out in your owners manual but it is now made by Konig who bought Thule. The set of chains you'd need is part #TH2004705265. These…

It does look like the 2019 Grand Cherokee has limited clearance in the wheel wells and requires the use of low profile or Class S rated snow chains and you will want to refer to your owner's manual on which tires to use the chains on; it's…

Titan tire chains #TC2326 do indeed fit both the 265/50R20 tires and the 255/70R18 tires on your Jeep Grand Cherokee and Wrangler. The reason you were told not to install chains is because on some vehicles the inner tire sidewall is very close to…

The best solution when it comes to snow chains that will also handle dealing with some icy conditions, are using a set of chains that has ice spikes since they will dig into the ice and provide the greatest traction in these conditions. The Konig…

In your owner's manual, for the 265/50-20 tire size Jeep (FCA) specifies the Thule (now owned by Konig) XG 12 Pro chains in size 267 which is part #TH01594267. These chains are considered Class S, which allow the proper clearance so that the…

We do have a fit for Konig Self-Tensioning Snow Tire Chains for your 2021 Jeep Grand Cherokee, and there are a couple of different options depending on your tire size, so you will want to confirm that and go with one of the following: - 265/50-20…

The Konig Self-Tensioning Snow Tire Chains part #th2004705265 are a confirmed fit for the 265/60-18 tires on a 2018 Jeep Grand Cherokee. The Konig Self-Tensioning Snow Tire Chains comes with one pair of chains, so two chains enough to cover the two…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…