Hopkins Multi-Tow Trailer Connector Installation - 2019 Chevrolet Colorado Video

There is no plug-in wiring adapter for a brake controller on a 2019 Chevy Colorado; most brake controllers such as the Prodigy P3 #90195 will need to be hardwired into the vehicle. For this you can use the Replacement Brake Control Plug-In Harness…

I attached a diagram that shows how to match all of the wire colors of the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector #HM11141144 to the wire colors on your 2017 GMC Canyon.

7-way wiring colors can vary on a trailer. The #HM11141144 from your question follows the traditional SAE (See the diagram below) with red for the 12V power instead of black. The purple in this case would be the reverse lights. On the RV standard it…

The 7-way tester part #C73NR would work on your 2016 Chevy Silverado 1500 for all circuits unless you have an integrated brake controller. That's pretty much the only circuit we have found that doesn't like to work with this tester on the…

Since you have fresh parts in the hubs and provided they are installed properly, I suspect there is a problem somewhere in the wiring or with the brake controller installation and set up. You will need to check the whole system, step by step, to find…

If your 2008 Ford F-450 does not have any existing connector installed at the rear of the truck, you will need to start by installing a 4-Way. For this, I recommend the Tekonsha 4-Pole Hardwire Kit #18252. This universal harness includes the needed…

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…