Hopkins Trailer Connector Socket Installation - 2003 Chevrolet Silverado Video

The stock bumper of your 2002 Chevy Silverado 1500 is not a deep drop bumper so the etrailer hitch part #e98849 is a fit for it and would work well.

The Replacement No-Drill Inflation Valve Bracket for Firestone Air Helper Springs Systems #F98ZR does not come with the cable ties you're looking for. Instead, you'll want to use the Replacement Inflation Valve Bracket for Firestone…

To install a brake controller like the #5504 that you referenced you only need to connect it to 4 wires. If you find more wires on your vehicle than would be needed to install the controller you wouldn't need to do anything with them. I…

The etrailer brand #e98849 hitch which is a confirmed fit for your 2010 Silverado. The hitch installs using 6 bolts, two of which use nuts that are welded up into the holes closest to the rear of the frame as shown in the provided diagram. Two…

I can help explain the difference between the listing for towing weight and weight distribution towing capacity for you. Let's use the Draw-Tite Class V Trailer Hitch #DT45502, which is a confirmed fit for you 1992 Ford, that you were looking at.…

Most of the Class V trailer hitches for your 2003 Chevy 3500 do not require drilling for installation. The most popular option is Curt hitch #C15312. The recommended ball mount for this hitch is #C45341. For a 2-5/16 inch ball that will fit this ball…

With a 2000 Chevy Silverado, you should have a connector underneath the truck that a wiring harness will clip into. Tow Ready part #118384 clips into the factory tail light wiring harness to provide a 4-Way flat trailer connector. I have included the…

I'd be happy to help you with that. Your Suburban has 3 different fuse panels, one in the center console, one in the drivers side of the dash where it abuts the inside of the driver's side door and one in the engine compartment. You'll…

The 7-Way trailer connector on the back of your 2003 Chevy Silverado should have a round plug behind it that plugs into another harness that continues up to the front of the truck. What you can do is use #C55774 which comes with a new mounting…

Yes, the #HM40975 that you referenced will fit the connector in your picture. The picture is pretty blurry though. So if you are needing to replace that harness as well the part #HM40975-11998 comes with the connector with wires that could get…

The difference between the Curt Trailer Hitch Receivers #C15312 and #C15313 for your 2006 Chevrolet Silverado 3500 is that part #C15312 will work with vehicles that have the factory cutout bumper only while part #C15313 is designed to be used with…

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".