etrailer Class III Trailer Hitch Installation - 2021 Ford Escape Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

No, you will not have to trim the bumper to install the Curt #C23FR on your 2023 Ford escape. This will be a fairly easy bolt on install. You may have to use a drill to enlarge a few of the holes in the frame in order to fit your fasteners, but it is…

There is a trailer wiring harness that fits your 2022 Ford Escape Hybrid with the battery in the back, from Tekonsha: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TE54FR Installing the #TE54FR is going to be easier for you with…

The Curt hitch part #C23FR is a fit for your 2020 Ford Escape Hybrid and can install without a die grinder or any power tools. You can use a file to enlarge the hole which is a very common approach. Or a drill could work too if you happen to have…

I suggest the Curt Trailer Hitch Receiver, #C23FR. This is a Class III - 2", custom fit hitch designed specifically for the Ford Escape. This bolt-on installation comes complete with needed hardware kit and installation instructions included.…

When it comes to the Curt Trailer Hitch Receiver #C23FR compared to the Draw-Tite Trailer Hitch Receiver #DR47FR for your 2020 Ford Escape there are a couple of differences between the two that I'll go over for you. The first is the style, with…

The etrailer hitch part #e89YR that you referenced does fit the hybrid models and will still allow the hands free liftgate to function but you'd have to kick to either side of the hitch opening to activate it.

We have the RV Bathroom Faucet - Dual Knob Handle, #277-000042 that has an overall height of 5" and meets your request of being a dual handle with inlets at 4" on center, this however does not have a rotating spout. Typically a 4" on…

The trailer hitch that I recommend for your 2022 Ford Escape Hybrid is the etrailer Trailer Hitch Receiver #e89YR because it has a matte black finish that does a great job at blending in with the trim on your vehicle plus it does a much better job at…

The Curt hitch part #C23FR does fit your 2021 Ford Escape and would be relatively easy to install and cost less than a Ford option. This hitch does require fishwiring bolts but since you've done that before it shouldn't be too bad. I attached…

Since your 2019 Ford Escape is limited to 100 lbs on the roof, and there is no way to increase capacity, the only way you can use a tent system with the '19 Escape is with a trailer that has a tent on it. - 2-Person Tent: Yakima EasyRider Double…

You always need to go by the lowest-rated capacity for towing, be it the hitch or the vehicle rating, so a hitch rated for 3,500 lbs does not increase the towing capacity of your 2022 Ford Escape hybrid with a maximum capacity of 1,500 lbs, it will…