Erickson Ladder Racks Review - 2020 Ford Ranger Video

Yes, the etrailer Trailer Hitch Receiver #e44KR fits your 1995 Chevy S-10 and is rated to tow up to 4,000 lbs with a 400 lb tongue weight. I really like this hitch because of the matte black finish that not only looks more rugged but is also more…

In order to flat-tow a 2021 Ford Ranger you'll need base plates, safety cables, tow bar, wiring harness, and supplemental braking system. I have attached my recommendations for these parts below. Roadmaster Direct-Connect Base Plate Kit…

We have the aluminum Erickson Truck Bed Ladder Rack part #EM07705 that is a confirmed fit for your 2019 Nissan Frontier King Cab 6 ft bed with the Utili Track. I attached a review video for this rack for more info for you to check out as well.

Yes, the Erickson Ladder Rack part #EM07705 that you referenced has been confirmed as a fit for your 2016 Toyota Tundra with the deck rail system. We confirmed this with Erickson. I attached a review video for this ladder rack for you to check out…

The SuperSprings Helper Springs #SSA28 will not raise your 2022 Ford F-150 beyond the factory height. Since these add support to your existing leaf springs, you might notice a slight difference once installed if the leaf springs are worn out. More…

In order to install a rack on top of a fiberglass tonneau cover you can use the Rhino-Rack #Y02-480B which comes with everything that you need including the adjustable tracks which allow you to get the exact crossbar spread you need.

Due to your headache rack and toolbox, I recommend you consider the Erickson Truck Bed Ladder Rack - Side Mount - Steel - 250 lbs #EM07708 for a ladder rack on your 2008 Ram 2500. This will not interfere with either accessory. A final option is the…

In order to determine which size cam locks you need for your trailer, you will want to note the thickness of the doors on which you are installing them. This will determine the size locks that will work on your storage doors. If you are simply…

I can confirm that the Erickson Over-The-Cab Truck Bed Ladder Rack part #EM07707 will work with your 2017 Nissan Frontier crew cab that has a 5' bed. This rack is fairly easy to install. It has a 800 lb weight capacity and works with most bed…

The Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs #EM07705 has adjustable load stops that will adjust up to 36.5 inches wide between the uprights. I confirmed this with the manufacturer. This rack will not allow you to carry a 48…

We checked with Erickson and they have confirmed the fit of the Erickson Ladder Rack part #EM07705 on your 2008 Nissan Frontier that has the Utili Track System. The j-hooks would fit between the track of the truck bed and the bed rail.

I went to the warehouse to measure the Universal Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob #331-TPSI-001 and found the back was 1" x 1-1/2" and the widest point of the rear knob was 15/16"; this will…