Does Erickson Ladder Rack # EM07705 Fit 2008 Nissan Frontier with Utili-Track

Question

Question:

How are the Erickson Ladder Racks tool box compatable with the J hook system? 2008 Nissan Frontier Xtra-Cab Thanks

asked by: Alan K

0

Expert Reply:

We checked with Erickson and they have confirmed the fit of the Erickson Ladder Rack part # EM07705 on your 2008 Nissan Frontier that has the Utili Track System. The j-hooks would fit between the track of the truck bed and the bed rail.

expert reply by: Jameson C

0

Answer 1

Yes, the Erickson Ladder Rack part #EM07705 that you referenced is a confirmed fit for your 2000 Nissan Frontier whether it has a 5 or 6 foot bed and would work well.

view full answer...

Answer 2

The ladder rack I highly recommend checking out for your 2017 Ram 1500 is the Erickson Truck Bed Ladder Rack #EM07705. This is a confirmed fit for '17 Ram 1500's of any bed size so long as they do not have a RamBox installed. The Erickson…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 9

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Does Erickson Ladder Rack # EM07705 Fit 2008 Nissan Frontier with Utili-Track

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching