etrailer Trailer Hitch Fitment on a 1995 Chevy S-10 for Light Duty Trailer Towing

Question

Question:

I need to tow a small trailer with my '95 S-10. Will this do the trick?

asked by: Al

0

Expert Reply:

Yes, the etrailer Trailer Hitch Receiver # e44KR fits your 1995 Chevy S-10 and is rated to tow up to 4,000 lbs with a 400 lb tongue weight. I really like this hitch because of the matte black finish that not only looks more rugged but is also more durable than the classic glossy black finish against road debris.

The next thing you need for your towing setup you also need the Curt T-Connector Wiring # C55312 and mounting brackets # 18144 and # C57202. This gives you a way to place the wiring right next to your hitch receiver for easier access.

To round everything out I recommend picking up the Curt Multi-Ball Adjustable Ball Mount # D900 which gives you 3 hitch ball sizes as well as some height adjustment to fit a variety of trailer applications.

Attached are some videos for you to check out.

expert reply by: Jon G

0

Answer 1

It looks like you are already on the right track. A great choice for a jack will be the Ark Xtreme off road jack like the #ORJW500D. They do put bearings in the tube which allow the wheel to turn freely. Also the design and offset of the wheel…

view full answer...

Answer 2

From the ground to the middle of the mounting bracket for the Extreme Off-Road Swing-Up Jack w/ Dual Wheels #ORJW500D measures 710mm (27.95") when you have it set at the highest setting. This jack gives us the ability to extend the leg using…

view full answer...

Answer 3

If you take a look at the picture I have included the truck in it has a type of roll pan bumper. Essentially it is a bumper that matches the contours of the vehicle instead of protruding out like a regular step bumper. If your 1989 Chevy S-10 has a…

view full answer...

Answer 4

Sounds like you have the Sportside with a non towing bumper which would mean you would want the part #75085. If instead you had the factory roll pan bumper you would want the pat #13920. I attached a picture of what the sportside with non-towing…

view full answer...

Answer 5

The Curt Class III hitch you'd looked at, part #C13021 is indeed a fit for the 2002 GMC Sonoma with the factory step bumper, as shown in the provide photo. If you'll be using the hitch for towing, you can install a 4-pole trailer connector…

view full answer...

Answer 6

I recommend using the Curt Class III Trailer Hitch Receiver #C13021 for your 1992 Chevy S-10 with the factory step bumper because it features a hidden crosstube and an extended receiver to make it more easily accessible for attaching a ball mount or…

view full answer...

Answer 7

The Draw-Tite Hitch #75085 that you referenced would be exactly what you would need. This hitch is designed to work on 1998 Chevy S-10s with stepside and a roll pan bumper so it should work well for you. The install will require the temporary removal…

view full answer...

Answer 8

Thanks for the picture! For your 2002 Chevy S-10 Extreme, you will want the Curt Trailer Hitch item #13920. This hitch is custom fit and bolts to your S-10 with included hardware. Since your truck has the factory roll pan bumper this will mount the…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

etrailer Trailer Hitch Fitment on a 1995 Chevy S-10 for Light Duty Trailer Towing

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching