Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Subaru Outback Wagon Video

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

Both of these Thule racks will do an excellent job of safely and economically hauling four bikes (assuming you aren't using a Class I hitch, which has a manufacturer recommended limit of hauling two bikes at a time). The Camber #TH9056 is lighter…

It looks like Subaru only offers a class I, 1-1/4" trailer hitch for a 2011 Subaru Outback. Therefore, if you need a class III, 2" trailer hitch for your 2011 Subaru Outback you will have to use an aftermarket trailer hitch. The issue with…

The Draw Tite Hitch part #75673 is a carry over from the 2017 Subaru Outback to the 2018 model. Draw Tite was able to get their hands on this vehicle very early to test fit and confirm the fit. I attached an installed picture for you to check out as…

The Outback Sport is referring to the Subaru Impreza model that is called the Outback Sport. The Draw-Tite Class III 2 Inch Hitch, part #75673, is visible underneath the rear fascia, but the receiver tube does not protrude from under the vehicle.…

We don't have any specific installers we recommend in your area but any mechanic you trust will be able to install your hitch if you aren't comfortable doing so yourself. It will take about an hour to install. The Draw-Tite Max-Frame Trailer…

I went out to the warehouse to take the measurements you asked for and found that the hitch measured approximately 2-1/2 inches from the center of the hitch pin hole to the end of the receiver. In terms of the receiver depth of the Draw-Tite #76227…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You're basically hit the nail on the head with the main differences between the Draw-Tite, part #75673, and the EcoHitch, part #306-X7162. The Draw-Tite is less expensive and is a great hitch, but the EcoHitch has a cleaner more OEM look to it.…

When installing trailer wiring into your 2018 Subaru Outback Wagon like the Tekonsha kit part #118467 the harness is found in the rear cargo area underneath some of the panels by the wheel well on the driver side. If you check out the picture I…

I looked at the installation instructions for your 2014 Subaru Forester and found that the wiring harness is located behind the rear panel on the driver side. The location is very similar to the Crosstrek in the attached video. The video explains how…

The trailer hitch I recommend for a 2019 Nissan Rogue is the etrailer Trailer Hitch Receiver part #e98846. The etrailer hitch has a 525 lb tongue weight capacity which is the highest currently available. However, the vehicle is limited to a tongue…