Draw-Tite Max-Frame Trailer Hitch Installation - 2011 Subaru Outback Wagon Video

The EcoHitch Hidden Trailer Hitch Receiver #306-X7266 mounts almost identically to the Draw-Tite #76227. They are vey comparable in quality and the trimming of the lower fascia is in the same location. The Draw-Tite hitch is my recommendation based…

A great majority of standard ball mounts are designed so that they can be used in either the drop or rise position. Using a ball mount like the Draw-Tite #2753 that you were looking at in the rise position is just a matter of turning it upside down…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I…

The Draw-Tite part #75673 that you referenced has been confirmed as a fit for your 2015 Subaru Outback and has a 600 lb tongue weight rating so IT has enough capacity for towing your trailer, but if the vehicle ends up having a lower tongue weight…

The Draw Tite Hitch part #75673 is a carry over from the 2017 Subaru Outback to the 2018 model. Draw Tite was able to get their hands on this vehicle very early to test fit and confirm the fit. I attached an installed picture for you to check out…

When we installed Draw-Tite 2-Inch hitch #75673 on a 2017 Subaru Outback Wagon we measured the height of the top of the receiver opening as 15-inches above ground. You can see this dimension illustrated in the linked video at the 1:40-minute mark.…

We don't have any specific installers we recommend in your area but any mechanic you trust will be able to install your hitch if you aren't comfortable doing so yourself. It will take about an hour to install. The Draw-Tite Max-Frame Trailer…

You are safe to tow up to the full rated capacity of your 2010 Subaru Outback 2.5L. The online owners manual states a maximum loaded trailer weight of 2,700 lbs with a maximum tongue weight of 200 lbs. The manual states this is 8% of the maximum…

I took a look at the online owner's manual for your 2012 Subaru Outback and found that as long as you have the 3.6L engine, the vehicle is capable of towing a 3,000 pound trailer if it is equipped with brakes. For a trailer without brakes, the…

What sets the EcoHitch #306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…