Review of etrailer Gooseneck and Fifth Wheel Adapters - Fifth Wheel Adapter for Gooseneck - KPG5-Q30 Video

When installing the stake pockets like part #PK-BSP, there is no standard installation. You will want to make sure you have enough to secure the loads you plan on carrying. I called my contact at Rack'Em and they told me if you are planning on…

From the center of the top adjustment hole on the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter part #KPG5-Q30IP measures 15 inches.

What you describe isn't normal. Trailer axles are manufactured with a bow or crown in them, a slight arc with the high side on the top of the axle. When the trailer is loaded, the axle will straighten out so the tires make even contact with the…

The Curt X5 Gooseneck to 5th Wheel Adapter part #16310 would work well in the B and W Turnover Gooseneck hitch you have installed in your 2003 GMC 2500HD but it is not compatible with your Husky 16k Slider Hitch. Your best option would be to go with…

The best 5th wheel hitch for your 2023 Ram 3500 is going to be the B&W Companion OEM 5th Wheel Hitch item #BWRVK3600. This hitch has a 25,000 lbs capacity and mounts directly into the factory puck system. This allows you to quickly remove your…

In order to make 90 degree turns and have a little clearance left over to account for uneven ground the distance from the back of the cab to the center of the ball or hitch jaws, including any travel from a slider, needs to be at least 4 inches…

I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said, what you can do is install a new outer tube and inner tube of the standard…

I looked up several pictures of the Kaufman 3/4 car wedge and I couldn't find any that showed it having a fifth wheel king pin instead of a gooseneck. The ones I found all had gooseneck couplers which yours could have had swapped to a king pin…

It sounds like you have a gooseneck like the Atwood Gooseneck Trailer Coupler AT75401. For an adapter to kingpin, I recommend the Bulldog Gooseneck-to-5th-Wheel Trailer Coupler Adapter - Inner Tube - Square - 30,000 lbs #BD0289650300 or the…

Your trailer wheel looks like a standard mod wheel with an 8 on 6-1/2 inch bolt pattern so the QuickTrim Ring part #PXQT865CLO would easily fit.

I looked up the Big Tex 22GN Gooseneck trailer and see that it has a square tube coupler. We do have an adapter, inner tube only, for square tubes, #BD0289650300. The tube is 4 inches wide on the outside. It uses holes for pins or bolts though so if…

The adapter you need is the Valterra part #T1041-1 that you referenced as it fits your configuration needs. The 3 inch portion fits into the tank and then the 1-1/2 inch portion fits over the elbow fitting like you need. Rubber cement is basically…