Review of Yakima Replacement Trailer Center Frame Rail - 8880727 Video

I checked with Yakima and they informed me that the length of the Replacement Tongue for Yakima Rack and Roll Trailer #8880204 is 69 inches.

You are correct, the Replacement Tail Block Locking Assembly #8880334 is only for the 2015 and up model year Rack and Roll trailers. According to Yakima, the reason is the thickness and length of the shaft was increased, so it's a different size.…

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you are…

One easy way to prevent someone from removing the ball would be to use a ball mount that has the ball attached (welded) to the shank. That way you won't have to weld a ball to a shank that isn't meant for that type of modification. Some…

The Replacement Tongue for Yakima Rack and Roll Trailer #8880204 is 3/16" thick. The overall dimensions are 69-5/8" long x 2" wide x 2" tall.

Typically it's the tires of a utility trailer that get problematic if stored for long periods of times. Although there are not exact rules for how to store a trailer tire. Our experience shows that the most beneficial way to store a trailer tire…

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

When you convert the width of your 180mm tire into inches, it's going to be 7.08", and the E-Track Wheel Chock #3481731 is designed to handle a maximum of 7" tires and you're going to be right at the cusp. Since we're dealing…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…