Can Center Section of Lasalle Bristol Tank Valve Replace Older Valve Setup
Question:
2018 Forest River Sunseeker 2400 W MBS. Valve was very hard to operate beginning this season. Removed T handle and operator from housing to allow reach rod to be fully extended. Fabricated a reservoir to attach to the threaded rod retainer for holding penetration oil. Secured this rig as high as possible and added Seafoam penetration oil and allowed to flow until oil drip from the cable at the valve. Some improvement but not satisfactory for travel. The valve installed in there now is a Lasalle Bristol. I see no advantage in modifying the tank or drain connectors, just to install the gate valve and reach rod assembly. Can I just purchase the part, remove the bolts and spigot or hub connectors and install the gate valve assembly with the new seals and bolting? I have seen this addressed somewhere previously, I would appreciate the backup..thank you.
asked by: Loy M
Helpful Expert Reply:
It would be possible if you are willing to remove just the center section of the # 34466N4AB96GMA and what you have now. The center portion would bolt right up to the flanges you have currently.
Product Page this Question was Asked From
LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 96" Cable
- RV Waste Valves
- Straight Valve
- Single Waste Valve - Cable Actuated
- 3 Inch Hub
- 3 Inch Spigot
- Stationary Valve
- LaSalle Bristol
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Video: Review of Timken Trailer Bearings Races Seals Caps - Bearing And Race Kit - TMK92VR
- Video: Review of Valterra RV Waste Valves - Valve Body with Flexible Cable - VAL54MB
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: dicor
- Q&A: Can You Cut To Length The LaSalle Bristol Cable-Actuated RV Waste Valve
- Video: Review of LaSalle Bristol RV Sewer - Waste Valves - 34466N4BB96GM
- Video: Review of LaSalle Bristol RV Sewer - Waste Valves - 34466N4AB96GMA
- Search Results: trailer hitch ball mount
- Q&A: Correct Replacement Bearings and Seals for Dexter 7,000 Lb Axle
- Shop: LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable
- Shop: Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 120"
- Shop: LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank - Spigot to Hub - 48" Cable
- Shop: Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug
- Shop: LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 120" Cable
- Shop: LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 72" Cable
- Shop: LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 96" Cable
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-200 Review
- Q&A: Replacing Valve Cable on LaSalle Bristol RV Waste Valve # 34466N11AB96GMA
- Search Results: grease seals
- Search Results: rg06~70
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Video: TruRyde Double Lip Grease Seals Review
- Search Results: l44649
- Shop: Suspension Enhancement
- Q&A: Which Gen-Y Gooseneck Adapter Fits 2020 Keystone Raptor 424
- Shop: Fifth Wheel Hitch
- Search Results: bearing buddy
- Article: Trailer Wiring Diagrams
on RV Waste Valves
