Titan Trailer Brakes T4445300 Review Video

You are correct. We sell the assemblies as a pair as part #AKFBBRK-35-D or individually as part #AKFBBRK-35R-D and #AKFBBRK-35L-D.

The best replacement brake kit assembly that you're looking for is one that we have branded under the etrailer name: - Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D This has the…

In regards to wheel size compatibility, this comes from the hub as the surface area on said hub is what dictates the wheel size. Therefore, if you're already using 13" wheels with your existing hubs then there won't be any issues with…

Yes, your best and most cost effective option for increasing the braking on your trailer would simply be to add brakes to the other axle. You really can't go with a larger size without replacing the axle and switching to disc won't increase…

To determine which hydraulic drum brake assemblies will fit on your 2,500 pound axles you'll need to measure the dimensions of your drums. For example, if your drums are 10 by 2-1/4 inches you can use #AKFBBRK-35-D. Since you have a boat trailer…

The Hydraulic Brake Kit part #AKFBBRK-35-D are just what you need to replace the hydraulic free-backing braking assemblies on your trailer. The hydraulic 10" braking assemblies are all going to have the same 2-1/4" depth which is measured…

The e-coat on the #AKFBBRK-35 is basically a paint that uses an electrical current to apply it to the surface. The Dacromet coating on the #AKFBBRK-35-D is a water-based adhesive coating made of zinc and aluminum flakes. The part is dipped in the…

The thread size that the brake line fittings of the Hydraulic Brake Kit #AKFBBRK-35-D that you referenced is 3/8"-24. This is the standard size that brake lines and fittings are made for.

The #20TA-BLKIT brake line kit you referenced is indeed compatible with the #AKUBRK-35-D Hydraulic Brake assemblies you'd looked at, the line kit is compatible with bolt disc and drum brake systems. The brake assemblies will be compatible with…

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

It looks like you have 3,500lb Dexter axles; while we do not have torsion axles exactly like that, we have another option that may work for you. If you don't need any lift or drop, which it looks like you don't, then I would look into the…

If you have 13 inch wheels on your trailer, then the Kodiak Disc Brake Kit #K1HR35S unfortunately, can not be used with 13 inch wheels. However, The Kodiak Disc Brake Kit, #K2HR35DS, will work on a trailer that has 13 inch wheels. You will need to…