Review of Taylor Made Boat Flag Parts - Aluminum Flag Pole with Clips - 369919 Video

You definitely could install the 7-Way Molded Trailer Wire Connector #H20046 in place of the 5-way that is installed on your trailer currently. The colors wouldn't match up exactly. White would go to white, you would run both brown wires to the…

I've linked a help article that will give you the common color coding but on your trailer I wouldn't go by it. Even if they are correct you just never know so I suggest testing it. To test it cut off the 5-way connector that's on there…

What you have is a 5-way trailer connector with a wishbone running light circuit and 5th auxiliary circuit. The closest thing we have would be the Wishbone 5-way Part #A25W5B. This has a wishboned running light circuit, but the 5th circuit is not.…

What you have is a 5-way with a double wishbone, which means it is likely a double wire for marker lights as well as a double ground. You can replace your 5-way with another wishbone-style but it does not need to be a double wishbone with 7 wires,…

The wires on your 4-way trailer connector are as follows: White - Ground Yellow/Brown - Left Side Trailer Running Light Green/Brown - Right Side Trailer Running Light Yellow - Left Side Trailer Stop/Turn Light Green - Left Side Trailer Stop.Turn…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…