2018 Forest River FR3 32DS Anti-Sway Bar Bushings and Replacement Sway Bars

Question

Question:

Hello I was hoping you could tell me what size anti-sway Bar and Anti-Sway Bar Bushings for Motorhome 2018 FR3 32DS

asked by: Car C

0

Expert Reply:

I would be happy to help you find those parts for your 2018 Forest River FR3 Motorhome. We have 3 different OEM bushing kits depending on which size sway bar your Motorhome came with.

The first is the Roadmaster Polyurethane Bushing Kit for 1-3/8" Diameter, Factory Rear Anti-Sway item # RM-4139-300. This is for the 1 3/8" OEM rear anti-sway bar.

The second is the Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar item # RM88FR. This is for the 1 1/2" diameter OEM rear anti-sway bar.

The final one is the Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar item # RM-4139-127. This is the 1 5/8" diameter OEM replacement set for the front anti-sway bar

For the rear, we have the Roadmaster Rear Anti-Sway Bar item # RM-1139-146. The sway bar is 1 1/2"

expert reply by: Jerred H

0

Answer 1

I pulled the Roadmaster Polyurethane Bushing Kit #RM-4139-127 from our warehouse and took measurements for you. The metal bracket measures 4-1/2 inches center on center holes and 6-3/16 inches outside to outside. The linked photos show you the key…

view full answer...

Answer 2

The 2008 Winnebago Journey Motorhome was built on a Freightliner XC chassis. Given that information, the correct sway bar is the Roadmaster Front Anti-Sway Bar #RM-1209-136.

view full answer...

Answer 3

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 4

The bolt holes for the Roadmaster Polyurethane Bushing Kit #RM-4109-106 are spread 3.3" with the slots being 1/2" wide and 3/4" long.

view full answer...

Answer 5

The correct U-clamp/bushing clamp for the Roadmaster Front Anti-Sway Bar 1139-140 and #RM-1139-148 is the Replacement Bushing Clamp for Roadmaster Front Anti-Sway Bar #RM64MR. This is the same as the B914 found in the installation instructions.

view full answer...

Answer 6

The biggest improvement you can make in handling and stability for motorhomes built on a 2017 Ford F-53 chassis is with a rear sway bar like the part #RM-1139-146 which is correct for your motorhome and your 18k GVWR. Next up you'd want to…

view full answer...

Answer 7

The Roadmaster Replacement Bracket U Clamp for RM Front Sway Bar 1139-140 #RM-B141 measures 4 inches center of bolt hole to center of bolt hole, 5-1/2 inched end to end, 3 inches top to bottom, 1.975 inches inside, and the bolt hole measures 0.74…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 11

Hey Dave, Air Springs and SumoSprings both fall under the same category with the main goal to help prevent sag but offer different styles of solutions. Air springs offer the adjustability to help level your ride back out, which can make a huge…

view full answer...

Answer 12

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

2018 Forest River FR3 32DS Anti-Sway Bar Bushings and Replacement Sway Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching