Replacement Polyurethane Hat Bushing for Roadmaster Anti-Sway Bar End Link Assemblies - Qty 1
(5 reviews)
Price: $8.33
In Stock
Replacement Polyurethane Hat Bushing for Roadmaster Anti-Sway Bar End Link Assemblies - Qty 1
Item # RM-205223-00
Our Price: $8.33
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Videos (1)
- Photos
Roadmaster Accessories and Parts - RM-205223-00
- Anti-Sway Bars
- Anti-Sway Bar Parts
- Bushings
- Roadmaster
- Front Anti-Sway Bar
- Rear Anti-Sway Bar
Replace 1 polyurethane hat bushing for Roadmaster anti-sway bars. 2 Bushings install in each of the round ends of the end link assembly.
Features:
- Replace 1 polyurethane hat bushing for Roadmaster anti-sway bars
- 2 Bushings install around a metal sleeve (RM-205501-00 - sold separately) in the round end of the end link assembly
- 4 Bushings are needed to completely replace the bushings on your end link assembly
205223-00 Replacement Polyurethane Hat Bushing for Roadmaster Anti-Sway Bars - Qty 1
Video of Replacement Polyurethane Hat Bushing for Roadmaster Anti-Sway Bar End Link Assemblies - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Roadmaster Anti-Sway Bars RM-205223-00 Review
Speaker 1: Today, we're gonna take a look at the replacement polyurethane hat bushing for Roadmaster anti-sway bar end link assemblies. And this for a quantity of one. This will replace one polyurethane hat bushing for your Roadmaster anti-sway bars. It does require two of these bushings to install around the metal sleeve in the round end of the end link assembly. Now, the metal sleeve we do sell separately. This is what the metal sleeve would be.
It's part number RM-205501-00, and again we sell that separately on our website. But basically, one of the sleeves would go just like that. And the other sleeve would slide on the other side. And that'll get you one end of your end link assembly.So, basically four of these bushings are needed to completely replace the bushings on your complete end link assembly. But that should do it for the review on the replacement polyurethane hat bushing for Roadmaster anti-sway bar end link assemblies for a quantity of one..
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- etrailer mistake
Customer Reviews
Replacement Polyurethane Hat Bushing for Roadmaster Anti-Sway Bar End Link Assemblies - Qty 1 - RM-205223-00
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
Replace 1 polyurethane hat bushing for Roadmaster anti-sway bars. 2 Bushings install in each of the round ends of the end link assembly.by: James M07/06/2017
Excellent service at a good price. etrailer provided excellent communications when the product was back ordered. The replacement hat bushings definitely improved the ride on my Ford E-350 camper van. Thanks
by: Ron 09/25/2023
by: Thomas 05/22/2023
by: Thuan02/04/2022
by: Earle 10/07/2022
5
5
See what our Experts say about this Roadmaster Accessories and Parts
- Replacement Bushings for Roadmaster End Link Assemblies To replace just the hat bushing for your Roadmaster End Link Kit # RM-590230-00 you will need the part # RM-205223-00. For the metal sleeve that the bushings install around you will need the part # RM-205501-00. Each of these will include one bushing or sleeve so in order to replace the bushing and sleeve on both ends of a single End Link you will need to order a quantity of 2. If you need to replace both ends on both of the End Links you will need 4.
view full answer... - Recommended Replacement Bushings For A Roadmaster RM-4139-300 KitI will start off by saying that the Replacement Bushing # RM-205381-00 is the direct replacement for the Roadmaster Polyurethane Bushing Kit for 1-3/8" Diameter, Factory Rear Anti-Sway # RM-4139-300. To further that, the Replacement Polyurethane Hat Bushing # RM-205223-00 and Replacement Bushing # RM-205219-10 will also be direct replacements for this kit. As to the measurements, the # RM-205393-00 will measure .62" thick and have a 1.28" outer diameter and .43" inner diameter. The # RM-205381-00...
view full answer...
- Replacement Bushings For End Link RM-1129-130Per Roadmaster the Replacement Polyurethane Hat Bushing # RM-205223-00 is the correct replacement bushing for the End Link # RM-1129-130. You will also need the Replacement Bushing Sleeve # RM-205501-00. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.