Redline Trailer Suspension 126A1 Review Video

Nope, heavy-duty shackle straps are either 2-1/4" or 3-1/8", so the closest heavy-duty shackle strap to 2-3/4" would be the the 3-1/8" long, 1/2" thick Dexter Heavy-Duty Shackle Link #DX55FR. This option will still work for…

In regards to measuring shackle straps, you don't need to remove them to measure accurately. If they are still installed on the trailer simply measure from the center of each bolt head, the two most common are 2-1/4" part #TRSL225 and…

You want leaf spring shackles to be at a slight angle as that prevents the springs from flipping around to the other side of the equalizer over uneven terrain. I attached a picture that shows what the angle is typically like.

The thickness of the Shackle Strap #TRSL225 that you referenced 3/16 inches. The thickest shackle we offer in the length of 2-1/4 inches is the part #018-024-01 which is 1/2 inch thick. I know that sounds almost too thick to be true, but I've…

There is unfortunately no master list of every part number of every model of every year of trailer, so you would need to measure to find replacements. For example, equalizer #TREQE1 fits 1-3/4" wide, double-eye leaf springs with 9/16"…

The varying heights of the hangers is all designed so that you end up with the leaf springs as level as possible and still end up a desired distance away from the trailer frame. It may seem odd, but the center hanger will stick down further because…

If the outside width of hanger #E4139 is 2-5/16 inches and the metal thickness is 3/16 of an inch then you would take 2-5/16 and subtract 3/16, and then subtract another 3/16, to get 1-15/16 inches. It is meant to be used with leaf springs that are…

When determining if you need 10 inch or 12 inch brake assemblies there are a couple of easy things to check to confirm the fit for your trailer. The first thing is you can measure the diameter of your hub. The second thing is you can look at the…

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…

The number of leaves won't matter when going from a 3-Pack to 4-Pack or when going from a 4-Pack to a 3-Pack, so long as the weight capacity is correct there won't be an issue. The leaf thickness can vary from manufacturer to manufacturer…

Thanks for all that info and yes, we can absolutely get you the correct hub for your Dexter 2,000 lb EZ-Lube axle that will accept a 12 inch wheel (which would be appropriate since it has the correct load rating). The correct hub is the following: -…

It is highly recommended that the spring seat be at minimum tack welded to the axle. There have been issues that have resulted from the seat not be welded to the axle. If you do not have access to a welder, I recommend taking the trailer to a local…