Optronics Trailer Lights - Tail Lights - STL60RB Review Video

The Jeep-Style Combination LED Tail Light w/ Backup Light and License Plate Light - Driver Side #STL60RLBP and Passenger Side #STL60RB are not intended for use on a Jeep. They are simply the Jeep Style and are intended for trailer use. You will not…

See the picture to the right for a wiring diagram of seven-way vehicle end trailer connector. If you click on it you can enlarge it. I have also included a trailer wiring FAQ page for you to check out.

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

The LED version of the Optronics Jeep Style of taillights that you referenced #ST60RB are available as part #STL60RB for the passenger side and #STL60RLBP for the drivers side. These LED lights are stud mounted, as you requested and have 16 diodes…

The auxiliary or back-up wire on a 7-way trailer connector like #HM20041, is used to power to things like interior trailer lights or other 12V accessories. It can also be used to power backup lights, but not many trailers are equipped with those.…

When it comes to installing a 7 pin connector on your 2021 Ford Bronco with LED Taillights you first will need The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C42WR. Next you will need The Universal Installation Kit…

Since the plan is off-road tires for an off road trailer the best Timbren Axle Less kit system is the part #ASR35HDS02 which has a 4 inch lift built into it for better ground clearance and also is designed to allow for wider off-road tires as well.…

Yes, for your Timbren Heavy-Duty Axle-Less Trailer Suspension #ASR35HDS02 you can use the Dexter Trailer Hub and Drum Assembly #8-219-4UC3-EZ and then the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K…

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

Check out the picture I attached plus the FAQ article to the right to see a 7-way diagram you could use to wire up your trailer.

I had our warehouse measure the lower threaded bracket included with the Replacement Stake Pocket Insert for Adarac Custom Truck Bed Ladder Rack #A70432 and it measures 2-7/8" long x 2" wide and 3/16" thick as shown in the included…

Yes, the capture plate on the Stake Pocket Insert part #A70432 allows it to work on practically any stake pocket opening including the ones on your 2014 Ford F-150. It sounds like you may have an alternate application for these but nonetheless I have…