Review of Lippert Replacement Lift Kit Equalizer Plate - LC84PJ Video

What you need is the Correct Track tandem lift kit part #RR23QX which will give your current suspension setup a lift of up to 2-1/4 inches. Aside from that there isn't a way to gain additional height from the trailer.

We have the Correct Track Lift Kit part #LC87120 that would work great for you. This is a single axle lift kit that would give you a lift of 2-1/4 inches.

I do not recommend using a leaf spring spacer (lift block) on your trailer. The reason for this is because they can cause the trailer to become extremely bouncy and rough which is just going to put more stress on your suspension and wear out the…

In order to find the correct lift kit for your 2023 Riverside Retro 135 Camper, you'll first need to start by identifying the axle. If the trailer uses leaf spring axles then that makes things easy as your options are either an axle flip kit or…

The Lippert Components Standard Axle Lift Kit part #LC425750 is compatible with any trailer that uses standard leaf spring axles whether it's made by Lippert or Dexter. The kit is designed for single axle applications.

We've seen a lot of our neighbors raise their trailer considerably more than 1/2" without adversely affecting handling on their trailers; many of them use spacer blocks or axle flip kits to gain as much as 4 to 4-1/2" of additional…

To replace your 16K Reese Hitch #RP30047 head, you will want the Replacement Head for 16K Fifth Wheel #RP58146. If you want to replace the head and head support and handle, you will want #RP30047A which is rated for 16k.

The replacement head you are looking for your Reese 5th Wheel Trailer Hitch with Square Tube Slider - 16,000 lbs part #RP30051, is the Replacement Head for Reese 5th Wheel Trailer Hitch - 16,000 lbs part #RP58146. You may also need a Replacement…

I have an option for you. Since you mentioned that you already flipped your axles, the Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX will work to accomplish the lift you are needing. The Correct Track Trailer Alignment and Lift…

The Replacement Lippert Correct Track Weld-On Axle Hanger, part #LC303918, has raised edges to fit the octagon cam. Since this hanger cannot sit flush against the axle the Correct Track Trailer Alignment and Lift Kit - Tandem Axle, part #RR23QX, is…

The Correct Track Trailer Alignment and Lift Kit - Single Axle, part #LC87120, will require you to add longer wet bolts where the equalizer attaches to the hanger extension. The bolts measure 9/16" in diameter and they are 4" length, so…

You want to have at least 3 inches from the top of the tire to the bottom of the fender/wheel well, so upgrading to a 16" tire shouldn't be an issue in your case. Especially if you go with the Correct Track #RR23QX as well. This will add…